kelvin
/
ism-transceiver-915mhz
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ism-transceiver-915mhz/sim
History
Kelvin Ly 4fb7daebca Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
..
BFU520_Spar_NF_400MHz-2GHz Add NXP BFU520 scattering parameters 2019-03-19 01:09:50 -04:00
models Add SPICE models for BFU520* 2019-04-13 09:21:46 -04:00
qucs Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
.gitignore Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
README.md Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
bfu520_lo_amplifier.sch Finish first draft of LO amplifier 2019-04-13 18:49:50 -04:00
bfu520_mixer.sch Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
bfu_pa_1stage.sch Start work on power amplifier stage and LO amplifier 2019-04-13 09:21:21 -04:00
lo-amplifier-15db.ipynb LO amplifier simulation is pretty close to done; it seems like the BFU520XR will just barely do the job; compression point is >6 dBm, amplifier seems sufficiently stable 2019-04-13 15:17:12 -04:00
low_noise.ipynb Start work on power amplifier stage and LO amplifier 2019-04-13 09:21:21 -04:00
mixer_large_signal.sch Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
mixer_match.sch Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
mixer_matching.ipynb Match mixer LO input and RF output to 50 ohms 2019-04-14 02:59:21 -04:00
power_amplifier.ipynb Test out cascading them to get more gain 2019-03-19 01:09:00 -04:00

README.md

Basically a lot of simulations used for designing different stages of the discrete transceiver. It's an agglomeration of Qucs simulations with Jupyter notebooks, so you'll want those two programs to examine this stuff