115 lines
7.2 KiB
C
115 lines
7.2 KiB
C
/**
|
|
* Copyright (c) 2013 - 2019, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/* Template files (including this one) are application specific and therefore expected to
|
|
be copied into the application project folder prior to its use! */
|
|
|
|
#ifndef _UICR_CONFIG_H
|
|
#define _UICR_CONFIG_H
|
|
|
|
/*lint ++flb "Enter library region" */
|
|
|
|
#include <stdint.h>
|
|
|
|
/*
|
|
* Include this file in your project if you want to include in your compiled code files data
|
|
* for the User Information Configuration Registers (UICR) area; see nRF51 Series Reference
|
|
* Manual chapter User Information Configuration Registers. This file declares one variable
|
|
* per register of the UICR area and informs the linker where to place them. To include
|
|
* the desired value in the desired address, uncomment the variable with the proper address
|
|
* at the target area and update the assignment value.
|
|
*
|
|
* Please note that UICR values are stored in a reserved area of the flash and should only be
|
|
* stored into when downloading a hex file. Do not use these defined variables to store data
|
|
* at run time.
|
|
*
|
|
* Note as well that this file uses one non-standard attribute ("at"). It will only function
|
|
* with the ARMCC compiler toolset.
|
|
*
|
|
* Note that the hex file generated when this file is included will fail to download when using
|
|
* the standard download algorithm provided by Nordic. See example project "uicr_config_example"
|
|
* in any of the board example folders for an example of the recommended download method as well
|
|
* as the documentation that follows with the SDK. nrfjprog can be used as normal.
|
|
*
|
|
* Please note as well that if you are using a SoftDevice the UICR_CLENR0 address will
|
|
* already be in use. Do not uncomment that line.
|
|
*/
|
|
|
|
// const uint32_t UICR_CLENR0 __attribute__((at(0x10001000))) __attribute__((used)) = 0xFFFFFFFF; // WARNING: This address might be used by the SoftDevice. Use with care.
|
|
// const uint32_t UICR_RBPCONF __attribute__((at(0x10001004))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_XTALFREQ __attribute__((at(0x10001008))) __attribute__((used)) = 0xFFFFFFFF;
|
|
|
|
// const uint32_t UICR_ADDR_0x80 __attribute__((at(0x10001080))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x84 __attribute__((at(0x10001084))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x88 __attribute__((at(0x10001088))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x8C __attribute__((at(0x1000108C))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x90 __attribute__((at(0x10001090))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x94 __attribute__((at(0x10001094))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x98 __attribute__((at(0x10001098))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0x9C __attribute__((at(0x1000109C))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xA0 __attribute__((at(0x100010A0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xA4 __attribute__((at(0x100010A4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xA8 __attribute__((at(0x100010A8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xAC __attribute__((at(0x100010AC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xB0 __attribute__((at(0x100010B0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xB4 __attribute__((at(0x100010B4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xB8 __attribute__((at(0x100010B8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xBC __attribute__((at(0x100010BC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xC0 __attribute__((at(0x100010C0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xC4 __attribute__((at(0x100010C4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xC8 __attribute__((at(0x100010C8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xCC __attribute__((at(0x100010CC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xD0 __attribute__((at(0x100010D0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xD4 __attribute__((at(0x100010D4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xD8 __attribute__((at(0x100010D8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xDC __attribute__((at(0x100010DC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xE0 __attribute__((at(0x100010E0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xE4 __attribute__((at(0x100010E4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xE8 __attribute__((at(0x100010E8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xEC __attribute__((at(0x100010EC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xF0 __attribute__((at(0x100010F0))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xF4 __attribute__((at(0x100010F4))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xF8 __attribute__((at(0x100010F8))) __attribute__((used)) = 0xFFFFFFFF;
|
|
// const uint32_t UICR_ADDR_0xFC __attribute__((at(0x100010FC))) __attribute__((used)) = 0xFFFFFFFF;
|
|
|
|
/*lint --flb "Leave library region" */
|
|
|
|
#endif //_UICR_CONFIG_H
|