/**
 * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 *
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
/** @file
 *
 * @defgroup app_button Button Handler
 * @{
 * @ingroup app_common
 *
 * @brief Buttons handling module.
 *
 * @details The button handler uses the @ref app_gpiote to detect that a button has been
 *          pushed. To handle debouncing, it will start a timer in the GPIOTE event handler.
 *          The button will only be reported as pushed if the corresponding pin is still active when
 *          the timer expires. If there is a new GPIOTE event while the timer is running, the timer
 *          is restarted.
 *
 * @note    The app_button module uses the app_timer module. The user must ensure that the queue in
 *          app_timer is large enough to hold the app_timer_stop() / app_timer_start() operations
 *          which will be executed on each event from GPIOTE module (2 operations), as well as other
 *          app_timer operations queued simultaneously in the application.
 *
 * @note    Even if the scheduler is not used, app_button.h will include app_scheduler.h, so when
 *          compiling, app_scheduler.h must be available in one of the compiler include paths.
 */

#ifndef APP_BUTTON_H__
#define APP_BUTTON_H__

#include <stdint.h>
#include <stdbool.h>
#include "nrf.h"
#include "app_error.h"
#include "nrf_gpio.h"

#ifdef __cplusplus
extern "C" {
#endif

#define APP_BUTTON_PUSH        1                               /**< Indicates that a button is pushed. */
#define APP_BUTTON_RELEASE     0                               /**< Indicates that a button is released. */
#define APP_BUTTON_ACTIVE_HIGH 1                               /**< Indicates that a button is active high. */
#define APP_BUTTON_ACTIVE_LOW  0                               /**< Indicates that a button is active low. */

/**@brief Button event handler type. */
typedef void (*app_button_handler_t)(uint8_t pin_no, uint8_t button_action);

/**@brief Button configuration structure. */
typedef struct
{
    uint8_t              pin_no;           /**< Pin to be used as a button. */
    uint8_t              active_state;     /**< APP_BUTTON_ACTIVE_HIGH or APP_BUTTON_ACTIVE_LOW. */
#if defined(BUTTON_HIGH_ACCURACY_ENABLED) && (BUTTON_HIGH_ACCURACY_ENABLED == 1)
    bool                 hi_accuracy;      /**< True if GPIOTE high accuracy (IN_EVENT) is used. */
#endif
    nrf_gpio_pin_pull_t  pull_cfg;         /**< Pull-up or -down configuration. */
    app_button_handler_t button_handler;   /**< Handler to be called when button is pushed. */
} app_button_cfg_t;

/**@brief Function for initializing the Buttons.
 *
 * @details This function will initialize the specified pins as buttons, and configure the Button
 *          Handler module as a GPIOTE user (but it will not enable button detection).
 *
 * @note app_button_enable() function must be called in order to enable the button detection.
 *
 * @param[in]  p_buttons           Array of buttons to be used (NOTE: Must be static!).
 * @param[in]  button_count        Number of buttons.
 * @param[in]  detection_delay     Delay from a GPIOTE event until a button is reported as pushed.
 *
 * @return   NRF_SUCCESS on success, otherwise an error code.
 */
uint32_t app_button_init(app_button_cfg_t const *       p_buttons,
                         uint8_t                        button_count,
                         uint32_t                       detection_delay);

/**@brief Function for enabling button detection.
 *
 * @retval NRF_SUCCESS Module successfully enabled.
 */
uint32_t app_button_enable(void);

/**@brief Function for disabling button detection.
 *
 * @retval  NRF_SUCCESS               Button detection successfully disabled. Error code otherwise.
 */
uint32_t app_button_disable(void);

/**@brief Function for checking if a button is currently being pushed.
 *
 * @param[in]  button_id     Button index (in the app_button_cfg_t array given to app_button_init) to be checked.
 *
 * @return     Button state.
 */
bool app_button_is_pushed(uint8_t button_id);


#ifdef __cplusplus
}
#endif

#endif // APP_BUTTON_H__

/** @} */