/*
* Copyright (c) 2010 - 2018, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* @file nrf9160.h
* @brief CMSIS HeaderFile
* @version 1
* @date 23. August 2019
* @note Generated by SVDConv V3.3.25 on Friday, 23.08.2019 12:17:05
* from File 'nrf9160.svd',
* last modified on Friday, 23.08.2019 10:17:00
*/
/** @addtogroup Nordic Semiconductor
* @{
*/
/** @addtogroup nrf9160
* @{
*/
#ifndef NRF9160_H
#define NRF9160_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup Configuration_of_CMSIS
* @{
*/
/* =========================================================================================================================== */
/* ================ Interrupt Number Definition ================ */
/* =========================================================================================================================== */
typedef enum {
/* ======================================= ARM Cortex-M33 Specific Interrupt Numbers ======================================= */
Reset_IRQn = -15, /*!< -15 Reset Vector, invoked on Power up and warm reset */
NonMaskableInt_IRQn = -14, /*!< -14 Non maskable Interrupt, cannot be stopped or preempted */
HardFault_IRQn = -13, /*!< -13 Hard Fault, all classes of Fault */
MemoryManagement_IRQn = -12, /*!< -12 Memory Management, MPU mismatch, including Access Violation
and No Match */
BusFault_IRQn = -11, /*!< -11 Bus Fault, Pre-Fetch-, Memory Access Fault, other address/memory
related Fault */
UsageFault_IRQn = -10, /*!< -10 Usage Fault, i.e. Undef Instruction, Illegal State Transition */
SecureFault_IRQn = -9, /*!< -9 Secure Fault Handler */
SVCall_IRQn = -5, /*!< -5 System Service Call via SVC instruction */
DebugMonitor_IRQn = -4, /*!< -4 Debug Monitor */
PendSV_IRQn = -2, /*!< -2 Pendable request for system service */
SysTick_IRQn = -1, /*!< -1 System Tick Timer */
/* ========================================== nrf9160 Specific Interrupt Numbers =========================================== */
SPU_IRQn = 3, /*!< 3 SPU */
CLOCK_POWER_IRQn = 5, /*!< 5 CLOCK_POWER */
UARTE0_SPIM0_SPIS0_TWIM0_TWIS0_IRQn= 8, /*!< 8 UARTE0_SPIM0_SPIS0_TWIM0_TWIS0 */
UARTE1_SPIM1_SPIS1_TWIM1_TWIS1_IRQn= 9, /*!< 9 UARTE1_SPIM1_SPIS1_TWIM1_TWIS1 */
UARTE2_SPIM2_SPIS2_TWIM2_TWIS2_IRQn= 10, /*!< 10 UARTE2_SPIM2_SPIS2_TWIM2_TWIS2 */
UARTE3_SPIM3_SPIS3_TWIM3_TWIS3_IRQn= 11, /*!< 11 UARTE3_SPIM3_SPIS3_TWIM3_TWIS3 */
GPIOTE0_IRQn = 13, /*!< 13 GPIOTE0 */
SAADC_IRQn = 14, /*!< 14 SAADC */
TIMER0_IRQn = 15, /*!< 15 TIMER0 */
TIMER1_IRQn = 16, /*!< 16 TIMER1 */
TIMER2_IRQn = 17, /*!< 17 TIMER2 */
RTC0_IRQn = 20, /*!< 20 RTC0 */
RTC1_IRQn = 21, /*!< 21 RTC1 */
WDT_IRQn = 24, /*!< 24 WDT */
EGU0_IRQn = 27, /*!< 27 EGU0 */
EGU1_IRQn = 28, /*!< 28 EGU1 */
EGU2_IRQn = 29, /*!< 29 EGU2 */
EGU3_IRQn = 30, /*!< 30 EGU3 */
EGU4_IRQn = 31, /*!< 31 EGU4 */
EGU5_IRQn = 32, /*!< 32 EGU5 */
PWM0_IRQn = 33, /*!< 33 PWM0 */
PWM1_IRQn = 34, /*!< 34 PWM1 */
PWM2_IRQn = 35, /*!< 35 PWM2 */
PWM3_IRQn = 36, /*!< 36 PWM3 */
PDM_IRQn = 38, /*!< 38 PDM */
I2S_IRQn = 40, /*!< 40 I2S */
IPC_IRQn = 42, /*!< 42 IPC */
FPU_IRQn = 44, /*!< 44 FPU */
GPIOTE1_IRQn = 49, /*!< 49 GPIOTE1 */
KMU_IRQn = 57, /*!< 57 KMU */
CRYPTOCELL_IRQn = 64 /*!< 64 CRYPTOCELL */
} IRQn_Type;
/* =========================================================================================================================== */
/* ================ Processor and Core Peripheral Section ================ */
/* =========================================================================================================================== */
/* ========================== Configuration of the ARM Cortex-M33 Processor and Core Peripherals =========================== */
#define __CM33_REV 0x0004U /*!< CM33 Core Revision */
#define __DSP_PRESENT 1 /*!< DSP present or not */
#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */
#define __MPU_PRESENT 1 /*!< MPU present */
#define __FPU_PRESENT 1 /*!< FPU present */
#define __FPU_DP 0 /*!< Double Precision FPU */
#define __SAU_REGION_PRESENT 0 /*!< SAU present */
/** @} */ /* End of group Configuration_of_CMSIS */
#include "core_cm33.h" /*!< ARM Cortex-M33 processor and core peripherals */
#include "system_nrf9160.h" /*!< nrf9160 System */
#ifndef __IM /*!< Fallback for older CMSIS versions */
#define __IM __I
#endif
#ifndef __OM /*!< Fallback for older CMSIS versions */
#define __OM __O
#endif
#ifndef __IOM /*!< Fallback for older CMSIS versions */
#define __IOM __IO
#endif
/* =========================================================================================================================== */
/* ================ Device Specific Cluster Section ================ */
/* =========================================================================================================================== */
/** @addtogroup Device_Peripheral_clusters
* @{
*/
/**
* @brief FICR_INFO [INFO] (Device info)
*/
typedef struct {
__IM uint32_t RESERVED;
__IM uint32_t DEVICEID[2]; /*!< (@ 0x00000004) Description collection: Device identifier */
__IM uint32_t PART; /*!< (@ 0x0000000C) Part code */
__IM uint32_t VARIANT; /*!< (@ 0x00000010) Part Variant, Hardware version and Production
configuration */
__IM uint32_t PACKAGE; /*!< (@ 0x00000014) Package option */
__IM uint32_t RAM; /*!< (@ 0x00000018) RAM variant */
__IM uint32_t FLASH; /*!< (@ 0x0000001C) Flash variant */
__IM uint32_t CODEPAGESIZE; /*!< (@ 0x00000020) Code memory page size */
__IM uint32_t CODESIZE; /*!< (@ 0x00000024) Code memory size */
__IM uint32_t DEVICETYPE; /*!< (@ 0x00000028) Device type */
} FICR_INFO_Type; /*!< Size = 44 (0x2c) */
/**
* @brief FICR_TRIMCNF [TRIMCNF] (Unspecified)
*/
typedef struct {
__IM uint32_t ADDR; /*!< (@ 0x00000000) Description cluster: Address */
__IM uint32_t DATA; /*!< (@ 0x00000004) Description cluster: Data */
} FICR_TRIMCNF_Type; /*!< Size = 8 (0x8) */
/**
* @brief FICR_TRNG90B [TRNG90B] (NIST800-90B RNG calibration data)
*/
typedef struct {
__IM uint32_t BYTES; /*!< (@ 0x00000000) Amount of bytes for the required entropy bits */
__IM uint32_t RCCUTOFF; /*!< (@ 0x00000004) Repetition counter cutoff */
__IM uint32_t APCUTOFF; /*!< (@ 0x00000008) Adaptive proportion cutoff */
__IM uint32_t STARTUP; /*!< (@ 0x0000000C) Amount of bytes for the startup tests */
__IM uint32_t ROSC1; /*!< (@ 0x00000010) Sample count for ring oscillator 1 */
__IM uint32_t ROSC2; /*!< (@ 0x00000014) Sample count for ring oscillator 2 */
__IM uint32_t ROSC3; /*!< (@ 0x00000018) Sample count for ring oscillator 3 */
__IM uint32_t ROSC4; /*!< (@ 0x0000001C) Sample count for ring oscillator 4 */
} FICR_TRNG90B_Type; /*!< Size = 32 (0x20) */
/**
* @brief UICR_KEYSLOT_CONFIG [CONFIG] (Unspecified)
*/
typedef struct {
__IOM uint32_t DEST; /*!< (@ 0x00000000) Description cluster: Destination address where
content of the key value registers (KEYSLOT.KEYn.VALUE[0-3
) will be pushed by KMU. Note that this
address MUST match that of a peripherals
APB mapped write-only key registers, else
the KMU can push this key value into an
address range which the CPU can potentially
read! */
__IOM uint32_t PERM; /*!< (@ 0x00000004) Description cluster: Define permissions for the
key slot. Bits 0-15 and 16-31 can only be
written when equal to 0xFFFF. */
} UICR_KEYSLOT_CONFIG_Type; /*!< Size = 8 (0x8) */
/**
* @brief UICR_KEYSLOT_KEY [KEY] (Unspecified)
*/
typedef struct {
__IOM uint32_t VALUE[4]; /*!< (@ 0x00000000) Description collection: Define bits [31+o*32:0+o*32]
of value assigned to KMU key slot. */
} UICR_KEYSLOT_KEY_Type; /*!< Size = 16 (0x10) */
/**
* @brief UICR_KEYSLOT [KEYSLOT] (Unspecified)
*/
typedef struct {
__IOM UICR_KEYSLOT_CONFIG_Type CONFIG[128]; /*!< (@ 0x00000000) Unspecified */
__IOM UICR_KEYSLOT_KEY_Type KEY[128]; /*!< (@ 0x00000400) Unspecified */
} UICR_KEYSLOT_Type; /*!< Size = 3072 (0xc00) */
/**
* @brief TAD_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t TRACECLK; /*!< (@ 0x00000000) Pin number configuration for TRACECLK */
__IOM uint32_t TRACEDATA0; /*!< (@ 0x00000004) Pin number configuration for TRACEDATA[0] */
__IOM uint32_t TRACEDATA1; /*!< (@ 0x00000008) Pin number configuration for TRACEDATA[1] */
__IOM uint32_t TRACEDATA2; /*!< (@ 0x0000000C) Pin number configuration for TRACEDATA[2] */
__IOM uint32_t TRACEDATA3; /*!< (@ 0x00000010) Pin number configuration for TRACEDATA[3] */
} TAD_PSEL_Type; /*!< Size = 20 (0x14) */
/**
* @brief SPU_EXTDOMAIN [EXTDOMAIN] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: Access for bus access generated
from the external domain n List capabilities
of the external domain n */
} SPU_EXTDOMAIN_Type; /*!< Size = 4 (0x4) */
/**
* @brief SPU_DPPI [DPPI] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: Select between secure and
non-secure attribute for the DPPI channels. */
__IOM uint32_t LOCK; /*!< (@ 0x00000004) Description cluster: Prevent further modification
of the corresponding PERM register */
} SPU_DPPI_Type; /*!< Size = 8 (0x8) */
/**
* @brief SPU_GPIOPORT [GPIOPORT] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: Select between secure and
non-secure attribute for pins 0 to 31 of
port n. */
__IOM uint32_t LOCK; /*!< (@ 0x00000004) Description cluster: Prevent further modification
of the corresponding PERM register */
} SPU_GPIOPORT_Type; /*!< Size = 8 (0x8) */
/**
* @brief SPU_FLASHNSC [FLASHNSC] (Unspecified)
*/
typedef struct {
__IOM uint32_t REGION; /*!< (@ 0x00000000) Description cluster: Define which flash region
can contain the non-secure callable (NSC)
region n */
__IOM uint32_t SIZE; /*!< (@ 0x00000004) Description cluster: Define the size of the non-secure
callable (NSC) region n */
} SPU_FLASHNSC_Type; /*!< Size = 8 (0x8) */
/**
* @brief SPU_RAMNSC [RAMNSC] (Unspecified)
*/
typedef struct {
__IOM uint32_t REGION; /*!< (@ 0x00000000) Description cluster: Define which RAM region
can contain the non-secure callable (NSC)
region n */
__IOM uint32_t SIZE; /*!< (@ 0x00000004) Description cluster: Define the size of the non-secure
callable (NSC) region n */
} SPU_RAMNSC_Type; /*!< Size = 8 (0x8) */
/**
* @brief SPU_FLASHREGION [FLASHREGION] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: Access permissions for flash
region n */
} SPU_FLASHREGION_Type; /*!< Size = 4 (0x4) */
/**
* @brief SPU_RAMREGION [RAMREGION] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: Access permissions for RAM
region n */
} SPU_RAMREGION_Type; /*!< Size = 4 (0x4) */
/**
* @brief SPU_PERIPHID [PERIPHID] (Unspecified)
*/
typedef struct {
__IOM uint32_t PERM; /*!< (@ 0x00000000) Description cluster: List capabilities and access
permissions for the peripheral with ID n */
} SPU_PERIPHID_Type; /*!< Size = 4 (0x4) */
/**
* @brief CTRLAPPERI_MAILBOX [MAILBOX] (Unspecified)
*/
typedef struct {
__IM uint32_t RXDATA; /*!< (@ 0x00000000) Data sent from the debugger to the CPU */
__IM uint32_t RXSTATUS; /*!< (@ 0x00000004) Status to indicate if data sent from the debugger
to the CPU has been read */
__IM uint32_t RESERVED[30];
__IOM uint32_t TXDATA; /*!< (@ 0x00000080) Data sent from the CPU to the debugger */
__IM uint32_t TXSTATUS; /*!< (@ 0x00000084) Status to indicate if data sent from the CPU
to the debugger has been read */
} CTRLAPPERI_MAILBOX_Type; /*!< Size = 136 (0x88) */
/**
* @brief CTRLAPPERI_ERASEPROTECT [ERASEPROTECT] (Unspecified)
*/
typedef struct {
__IOM uint32_t LOCK; /*!< (@ 0x00000000) Lock register ERASEPROTECT.DISABLE from being
written until next reset */
__IOM uint32_t DISABLE; /*!< (@ 0x00000004) Disable ERASEPROTECT and perform ERASEALL */
} CTRLAPPERI_ERASEPROTECT_Type; /*!< Size = 8 (0x8) */
/**
* @brief SPIM_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t SCK; /*!< (@ 0x00000000) Pin select for SCK */
__IOM uint32_t MOSI; /*!< (@ 0x00000004) Pin select for MOSI signal */
__IOM uint32_t MISO; /*!< (@ 0x00000008) Pin select for MISO signal */
} SPIM_PSEL_Type; /*!< Size = 12 (0xc) */
/**
* @brief SPIM_RXD [RXD] (RXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in receive buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} SPIM_RXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief SPIM_TXD [TXD] (TXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in transmit buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} SPIM_TXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief SPIS_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t SCK; /*!< (@ 0x00000000) Pin select for SCK */
__IOM uint32_t MISO; /*!< (@ 0x00000004) Pin select for MISO signal */
__IOM uint32_t MOSI; /*!< (@ 0x00000008) Pin select for MOSI signal */
__IOM uint32_t CSN; /*!< (@ 0x0000000C) Pin select for CSN signal */
} SPIS_PSEL_Type; /*!< Size = 16 (0x10) */
/**
* @brief SPIS_RXD [RXD] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) RXD data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in receive buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes received in last granted transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} SPIS_RXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief SPIS_TXD [TXD] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) TXD data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in transmit buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transmitted in last granted transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} SPIS_TXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief TWIM_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t SCL; /*!< (@ 0x00000000) Pin select for SCL signal */
__IOM uint32_t SDA; /*!< (@ 0x00000004) Pin select for SDA signal */
} TWIM_PSEL_Type; /*!< Size = 8 (0x8) */
/**
* @brief TWIM_RXD [RXD] (RXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in receive buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} TWIM_RXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief TWIM_TXD [TXD] (TXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in transmit buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} TWIM_TXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief TWIS_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t SCL; /*!< (@ 0x00000000) Pin select for SCL signal */
__IOM uint32_t SDA; /*!< (@ 0x00000004) Pin select for SDA signal */
} TWIS_PSEL_Type; /*!< Size = 8 (0x8) */
/**
* @brief TWIS_RXD [RXD] (RXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) RXD Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in RXD buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last RXD transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} TWIS_RXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief TWIS_TXD [TXD] (TXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) TXD Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in TXD buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last TXD transaction */
__IOM uint32_t LIST; /*!< (@ 0x0000000C) EasyDMA list type */
} TWIS_TXD_Type; /*!< Size = 16 (0x10) */
/**
* @brief UARTE_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t RTS; /*!< (@ 0x00000000) Pin select for RTS signal */
__IOM uint32_t TXD; /*!< (@ 0x00000004) Pin select for TXD signal */
__IOM uint32_t CTS; /*!< (@ 0x00000008) Pin select for CTS signal */
__IOM uint32_t RXD; /*!< (@ 0x0000000C) Pin select for RXD signal */
} UARTE_PSEL_Type; /*!< Size = 16 (0x10) */
/**
* @brief UARTE_RXD [RXD] (RXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in receive buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
} UARTE_RXD_Type; /*!< Size = 12 (0xc) */
/**
* @brief UARTE_TXD [TXD] (TXD EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of bytes in transmit buffer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of bytes transferred in the last transaction */
} UARTE_TXD_Type; /*!< Size = 12 (0xc) */
/**
* @brief SAADC_EVENTS_CH [EVENTS_CH] (Peripheral events.)
*/
typedef struct {
__IOM uint32_t LIMITH; /*!< (@ 0x00000000) Description cluster: Last results is equal or
above CH[n].LIMIT.HIGH */
__IOM uint32_t LIMITL; /*!< (@ 0x00000004) Description cluster: Last results is equal or
below CH[n].LIMIT.LOW */
} SAADC_EVENTS_CH_Type; /*!< Size = 8 (0x8) */
/**
* @brief SAADC_PUBLISH_CH [PUBLISH_CH] (Publish configuration for events)
*/
typedef struct {
__IOM uint32_t LIMITH; /*!< (@ 0x00000000) Description cluster: Publish configuration for
event CH[n].LIMITH */
__IOM uint32_t LIMITL; /*!< (@ 0x00000004) Description cluster: Publish configuration for
event CH[n].LIMITL */
} SAADC_PUBLISH_CH_Type; /*!< Size = 8 (0x8) */
/**
* @brief SAADC_CH [CH] (Unspecified)
*/
typedef struct {
__IOM uint32_t PSELP; /*!< (@ 0x00000000) Description cluster: Input positive pin selection
for CH[n] */
__IOM uint32_t PSELN; /*!< (@ 0x00000004) Description cluster: Input negative pin selection
for CH[n] */
__IOM uint32_t CONFIG; /*!< (@ 0x00000008) Description cluster: Input configuration for
CH[n] */
__IOM uint32_t LIMIT; /*!< (@ 0x0000000C) Description cluster: High/low limits for event
monitoring a channel */
} SAADC_CH_Type; /*!< Size = 16 (0x10) */
/**
* @brief SAADC_RESULT [RESULT] (RESULT EasyDMA channel)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Data pointer */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Maximum number of buffer words to transfer */
__IM uint32_t AMOUNT; /*!< (@ 0x00000008) Number of buffer words transferred since last
START */
} SAADC_RESULT_Type; /*!< Size = 12 (0xc) */
/**
* @brief DPPIC_TASKS_CHG [TASKS_CHG] (Channel group tasks)
*/
typedef struct {
__OM uint32_t EN; /*!< (@ 0x00000000) Description cluster: Enable channel group n */
__OM uint32_t DIS; /*!< (@ 0x00000004) Description cluster: Disable channel group n */
} DPPIC_TASKS_CHG_Type; /*!< Size = 8 (0x8) */
/**
* @brief DPPIC_SUBSCRIBE_CHG [SUBSCRIBE_CHG] (Subscribe configuration for tasks)
*/
typedef struct {
__IOM uint32_t EN; /*!< (@ 0x00000000) Description cluster: Subscribe configuration
for task CHG[n].EN */
__IOM uint32_t DIS; /*!< (@ 0x00000004) Description cluster: Subscribe configuration
for task CHG[n].DIS */
} DPPIC_SUBSCRIBE_CHG_Type; /*!< Size = 8 (0x8) */
/**
* @brief PWM_SEQ [SEQ] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Description cluster: Beginning address in RAM
of this sequence */
__IOM uint32_t CNT; /*!< (@ 0x00000004) Description cluster: Number of values (duty cycles)
in this sequence */
__IOM uint32_t REFRESH; /*!< (@ 0x00000008) Description cluster: Number of additional PWM
periods between samples loaded into compare
register */
__IOM uint32_t ENDDELAY; /*!< (@ 0x0000000C) Description cluster: Time added after the sequence */
__IM uint32_t RESERVED[4];
} PWM_SEQ_Type; /*!< Size = 32 (0x20) */
/**
* @brief PWM_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t OUT[4]; /*!< (@ 0x00000000) Description collection: Output pin select for
PWM channel n */
} PWM_PSEL_Type; /*!< Size = 16 (0x10) */
/**
* @brief PDM_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t CLK; /*!< (@ 0x00000000) Pin number configuration for PDM CLK signal */
__IOM uint32_t DIN; /*!< (@ 0x00000004) Pin number configuration for PDM DIN signal */
} PDM_PSEL_Type; /*!< Size = 8 (0x8) */
/**
* @brief PDM_SAMPLE [SAMPLE] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) RAM address pointer to write samples to with
EasyDMA */
__IOM uint32_t MAXCNT; /*!< (@ 0x00000004) Number of samples to allocate memory for in EasyDMA
mode */
} PDM_SAMPLE_Type; /*!< Size = 8 (0x8) */
/**
* @brief I2S_CONFIG [CONFIG] (Unspecified)
*/
typedef struct {
__IOM uint32_t MODE; /*!< (@ 0x00000000) I2S mode. */
__IOM uint32_t RXEN; /*!< (@ 0x00000004) Reception (RX) enable. */
__IOM uint32_t TXEN; /*!< (@ 0x00000008) Transmission (TX) enable. */
__IOM uint32_t MCKEN; /*!< (@ 0x0000000C) Master clock generator enable. */
__IOM uint32_t MCKFREQ; /*!< (@ 0x00000010) Master clock generator frequency. */
__IOM uint32_t RATIO; /*!< (@ 0x00000014) MCK / LRCK ratio. */
__IOM uint32_t SWIDTH; /*!< (@ 0x00000018) Sample width. */
__IOM uint32_t ALIGN; /*!< (@ 0x0000001C) Alignment of sample within a frame. */
__IOM uint32_t FORMAT; /*!< (@ 0x00000020) Frame format. */
__IOM uint32_t CHANNELS; /*!< (@ 0x00000024) Enable channels. */
} I2S_CONFIG_Type; /*!< Size = 40 (0x28) */
/**
* @brief I2S_RXD [RXD] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Receive buffer RAM start address. */
} I2S_RXD_Type; /*!< Size = 4 (0x4) */
/**
* @brief I2S_TXD [TXD] (Unspecified)
*/
typedef struct {
__IOM uint32_t PTR; /*!< (@ 0x00000000) Transmit buffer RAM start address. */
} I2S_TXD_Type; /*!< Size = 4 (0x4) */
/**
* @brief I2S_RXTXD [RXTXD] (Unspecified)
*/
typedef struct {
__IOM uint32_t MAXCNT; /*!< (@ 0x00000000) Size of RXD and TXD buffers. */
} I2S_RXTXD_Type; /*!< Size = 4 (0x4) */
/**
* @brief I2S_PSEL [PSEL] (Unspecified)
*/
typedef struct {
__IOM uint32_t MCK; /*!< (@ 0x00000000) Pin select for MCK signal. */
__IOM uint32_t SCK; /*!< (@ 0x00000004) Pin select for SCK signal. */
__IOM uint32_t LRCK; /*!< (@ 0x00000008) Pin select for LRCK signal. */
__IOM uint32_t SDIN; /*!< (@ 0x0000000C) Pin select for SDIN signal. */
__IOM uint32_t SDOUT; /*!< (@ 0x00000010) Pin select for SDOUT signal. */
} I2S_PSEL_Type; /*!< Size = 20 (0x14) */
/**
* @brief VMC_RAM [RAM] (Unspecified)
*/
typedef struct {
__IOM uint32_t POWER; /*!< (@ 0x00000000) Description cluster: RAMn power control register */
__OM uint32_t POWERSET; /*!< (@ 0x00000004) Description cluster: RAMn power control set register */
__OM uint32_t POWERCLR; /*!< (@ 0x00000008) Description cluster: RAMn power control clear
register */
__IM uint32_t RESERVED;
} VMC_RAM_Type; /*!< Size = 16 (0x10) */
/** @} */ /* End of group Device_Peripheral_clusters */
/* =========================================================================================================================== */
/* ================ Device Specific Peripheral Section ================ */
/* =========================================================================================================================== */
/** @addtogroup Device_Peripheral_peripherals
* @{
*/
/* =========================================================================================================================== */
/* ================ FICR_S ================ */
/* =========================================================================================================================== */
/**
* @brief Factory Information Configuration Registers (FICR_S)
*/
typedef struct { /*!< (@ 0x00FF0000) FICR_S Structure */
__IM uint32_t RESERVED[128];
__IOM FICR_INFO_Type INFO; /*!< (@ 0x00000200) Device info */
__IM uint32_t RESERVED1[53];
__IOM FICR_TRIMCNF_Type TRIMCNF[256]; /*!< (@ 0x00000300) Unspecified */
__IM uint32_t RESERVED2[64];
__IOM FICR_TRNG90B_Type TRNG90B; /*!< (@ 0x00000C00) NIST800-90B RNG calibration data */
} NRF_FICR_Type; /*!< Size = 3104 (0xc20) */
/* =========================================================================================================================== */
/* ================ UICR_S ================ */
/* =========================================================================================================================== */
/**
* @brief User information configuration registers User information configuration registers (UICR_S)
*/
typedef struct { /*!< (@ 0x00FF8000) UICR_S Structure */
__IOM uint32_t APPROTECT; /*!< (@ 0x00000000) Access port protection */
__IM uint32_t RESERVED[4];
__IOM uint32_t XOSC32M; /*!< (@ 0x00000014) Oscillator control */
__IM uint32_t RESERVED1;
__IOM uint32_t HFXOSRC; /*!< (@ 0x0000001C) HFXO clock source selection */
__IOM uint32_t HFXOCNT; /*!< (@ 0x00000020) HFXO startup counter */
__IM uint32_t RESERVED2[2];
__IOM uint32_t SECUREAPPROTECT; /*!< (@ 0x0000002C) Secure access port protection */
__IOM uint32_t ERASEPROTECT; /*!< (@ 0x00000030) Erase protection */
__IM uint32_t RESERVED3[53];
__IOM uint32_t OTP[190]; /*!< (@ 0x00000108) Description collection: One time programmable
memory */
__IOM UICR_KEYSLOT_Type KEYSLOT; /*!< (@ 0x00000400) Unspecified */
} NRF_UICR_Type; /*!< Size = 4096 (0x1000) */
/* =========================================================================================================================== */
/* ================ TAD_S ================ */
/* =========================================================================================================================== */
/**
* @brief Trace and debug control (TAD_S)
*/
typedef struct { /*!< (@ 0xE0080000) TAD_S Structure */
__OM uint32_t CLOCKSTART; /*!< (@ 0x00000000) Start all trace and debug clocks. */
__OM uint32_t CLOCKSTOP; /*!< (@ 0x00000004) Stop all trace and debug clocks. */
__IM uint32_t RESERVED[318];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable debug domain and aquire selected GPIOs */
__IOM TAD_PSEL_Type PSEL; /*!< (@ 0x00000504) Unspecified */
__IOM uint32_t TRACEPORTSPEED; /*!< (@ 0x00000518) Clocking options for the Trace Port debug interface */
} NRF_TAD_Type; /*!< Size = 1308 (0x51c) */
/* =========================================================================================================================== */
/* ================ SPU_S ================ */
/* =========================================================================================================================== */
/**
* @brief System protection unit (SPU_S)
*/
typedef struct { /*!< (@ 0x50003000) SPU_S Structure */
__IM uint32_t RESERVED[64];
__IOM uint32_t EVENTS_RAMACCERR; /*!< (@ 0x00000100) A security violation has been detected for the
RAM memory space */
__IOM uint32_t EVENTS_FLASHACCERR; /*!< (@ 0x00000104) A security violation has been detected for the
flash memory space */
__IOM uint32_t EVENTS_PERIPHACCERR; /*!< (@ 0x00000108) A security violation has been detected on one
or several peripherals */
__IM uint32_t RESERVED1[29];
__IOM uint32_t PUBLISH_RAMACCERR; /*!< (@ 0x00000180) Publish configuration for event RAMACCERR */
__IOM uint32_t PUBLISH_FLASHACCERR; /*!< (@ 0x00000184) Publish configuration for event FLASHACCERR */
__IOM uint32_t PUBLISH_PERIPHACCERR; /*!< (@ 0x00000188) Publish configuration for event PERIPHACCERR */
__IM uint32_t RESERVED2[93];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED3[61];
__IM uint32_t CAP; /*!< (@ 0x00000400) Show implemented features for the current device */
__IM uint32_t RESERVED4[15];
__IOM SPU_EXTDOMAIN_Type EXTDOMAIN[1]; /*!< (@ 0x00000440) Unspecified */
__IM uint32_t RESERVED5[15];
__IOM SPU_DPPI_Type DPPI[1]; /*!< (@ 0x00000480) Unspecified */
__IM uint32_t RESERVED6[14];
__IOM SPU_GPIOPORT_Type GPIOPORT[1]; /*!< (@ 0x000004C0) Unspecified */
__IM uint32_t RESERVED7[14];
__IOM SPU_FLASHNSC_Type FLASHNSC[2]; /*!< (@ 0x00000500) Unspecified */
__IM uint32_t RESERVED8[12];
__IOM SPU_RAMNSC_Type RAMNSC[2]; /*!< (@ 0x00000540) Unspecified */
__IM uint32_t RESERVED9[44];
__IOM SPU_FLASHREGION_Type FLASHREGION[32]; /*!< (@ 0x00000600) Unspecified */
__IM uint32_t RESERVED10[32];
__IOM SPU_RAMREGION_Type RAMREGION[32]; /*!< (@ 0x00000700) Unspecified */
__IM uint32_t RESERVED11[32];
__IOM SPU_PERIPHID_Type PERIPHID[67]; /*!< (@ 0x00000800) Unspecified */
} NRF_SPU_Type; /*!< Size = 2316 (0x90c) */
/* =========================================================================================================================== */
/* ================ REGULATORS_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Voltage regulators control 0 (REGULATORS_NS)
*/
typedef struct { /*!< (@ 0x40004000) REGULATORS_NS Structure */
__IM uint32_t RESERVED[320];
__OM uint32_t SYSTEMOFF; /*!< (@ 0x00000500) System OFF register */
__IM uint32_t RESERVED1[29];
__IOM uint32_t DCDCEN; /*!< (@ 0x00000578) Enable DC/DC mode of the main voltage regulator. */
} NRF_REGULATORS_Type; /*!< Size = 1404 (0x57c) */
/* =========================================================================================================================== */
/* ================ CLOCK_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Clock management 0 (CLOCK_NS)
*/
typedef struct { /*!< (@ 0x40005000) CLOCK_NS Structure */
__OM uint32_t TASKS_HFCLKSTART; /*!< (@ 0x00000000) Start HFCLK source */
__OM uint32_t TASKS_HFCLKSTOP; /*!< (@ 0x00000004) Stop HFCLK source */
__OM uint32_t TASKS_LFCLKSTART; /*!< (@ 0x00000008) Start LFCLK source */
__OM uint32_t TASKS_LFCLKSTOP; /*!< (@ 0x0000000C) Stop LFCLK source */
__IM uint32_t RESERVED[28];
__IOM uint32_t SUBSCRIBE_HFCLKSTART; /*!< (@ 0x00000080) Subscribe configuration for task HFCLKSTART */
__IOM uint32_t SUBSCRIBE_HFCLKSTOP; /*!< (@ 0x00000084) Subscribe configuration for task HFCLKSTOP */
__IOM uint32_t SUBSCRIBE_LFCLKSTART; /*!< (@ 0x00000088) Subscribe configuration for task LFCLKSTART */
__IOM uint32_t SUBSCRIBE_LFCLKSTOP; /*!< (@ 0x0000008C) Subscribe configuration for task LFCLKSTOP */
__IM uint32_t RESERVED1[28];
__IOM uint32_t EVENTS_HFCLKSTARTED; /*!< (@ 0x00000100) HFCLK oscillator started */
__IOM uint32_t EVENTS_LFCLKSTARTED; /*!< (@ 0x00000104) LFCLK started */
__IM uint32_t RESERVED2[30];
__IOM uint32_t PUBLISH_HFCLKSTARTED; /*!< (@ 0x00000180) Publish configuration for event HFCLKSTARTED */
__IOM uint32_t PUBLISH_LFCLKSTARTED; /*!< (@ 0x00000184) Publish configuration for event LFCLKSTARTED */
__IM uint32_t RESERVED3[94];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t INTPEND; /*!< (@ 0x0000030C) Pending interrupts */
__IM uint32_t RESERVED4[62];
__IM uint32_t HFCLKRUN; /*!< (@ 0x00000408) Status indicating that HFCLKSTART task has been
triggered */
__IM uint32_t HFCLKSTAT; /*!< (@ 0x0000040C) The register shows if HFXO has been requested
by triggering HFCLKSTART task and if it
has been started (STATE) */
__IM uint32_t RESERVED5;
__IM uint32_t LFCLKRUN; /*!< (@ 0x00000414) Status indicating that LFCLKSTART task has been
triggered */
__IM uint32_t LFCLKSTAT; /*!< (@ 0x00000418) The register shows which LFCLK source has been
requested (SRC) when triggering LFCLKSTART
task and if the source has been started
(STATE) */
__IM uint32_t LFCLKSRCCOPY; /*!< (@ 0x0000041C) Copy of LFCLKSRC register, set after LFCLKSTART
task has been triggered */
__IM uint32_t RESERVED6[62];
__IOM uint32_t LFCLKSRC; /*!< (@ 0x00000518) Clock source for the LFCLK. LFCLKSTART task starts
starts a clock source selected with this
register. */
} NRF_CLOCK_Type; /*!< Size = 1308 (0x51c) */
/* =========================================================================================================================== */
/* ================ POWER_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Power control 0 (POWER_NS)
*/
typedef struct { /*!< (@ 0x40005000) POWER_NS Structure */
__IM uint32_t RESERVED[30];
__OM uint32_t TASKS_CONSTLAT; /*!< (@ 0x00000078) Enable constant latency mode. */
__OM uint32_t TASKS_LOWPWR; /*!< (@ 0x0000007C) Enable low power mode (variable latency) */
__IM uint32_t RESERVED1[30];
__IOM uint32_t SUBSCRIBE_CONSTLAT; /*!< (@ 0x000000F8) Subscribe configuration for task CONSTLAT */
__IOM uint32_t SUBSCRIBE_LOWPWR; /*!< (@ 0x000000FC) Subscribe configuration for task LOWPWR */
__IM uint32_t RESERVED2[2];
__IOM uint32_t EVENTS_POFWARN; /*!< (@ 0x00000108) Power failure warning */
__IM uint32_t RESERVED3[2];
__IOM uint32_t EVENTS_SLEEPENTER; /*!< (@ 0x00000114) CPU entered WFI/WFE sleep */
__IOM uint32_t EVENTS_SLEEPEXIT; /*!< (@ 0x00000118) CPU exited WFI/WFE sleep */
__IM uint32_t RESERVED4[27];
__IOM uint32_t PUBLISH_POFWARN; /*!< (@ 0x00000188) Publish configuration for event POFWARN */
__IM uint32_t RESERVED5[2];
__IOM uint32_t PUBLISH_SLEEPENTER; /*!< (@ 0x00000194) Publish configuration for event SLEEPENTER */
__IOM uint32_t PUBLISH_SLEEPEXIT; /*!< (@ 0x00000198) Publish configuration for event SLEEPEXIT */
__IM uint32_t RESERVED6[89];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED7[61];
__IOM uint32_t RESETREAS; /*!< (@ 0x00000400) Reset reason */
__IM uint32_t RESERVED8[15];
__IM uint32_t POWERSTATUS; /*!< (@ 0x00000440) Modem domain power status */
__IM uint32_t RESERVED9[54];
__IOM uint32_t GPREGRET[2]; /*!< (@ 0x0000051C) Description collection: General purpose retention
register */
} NRF_POWER_Type; /*!< Size = 1316 (0x524) */
/* =========================================================================================================================== */
/* ================ CTRL_AP_PERI_S ================ */
/* =========================================================================================================================== */
/**
* @brief Control access port (CTRL_AP_PERI_S)
*/
typedef struct { /*!< (@ 0x50006000) CTRL_AP_PERI_S Structure */
__IM uint32_t RESERVED[256];
__IOM CTRLAPPERI_MAILBOX_Type MAILBOX; /*!< (@ 0x00000400) Unspecified */
__IM uint32_t RESERVED1[30];
__IOM CTRLAPPERI_ERASEPROTECT_Type ERASEPROTECT;/*!< (@ 0x00000500) Unspecified */
} NRF_CTRLAPPERI_Type; /*!< Size = 1288 (0x508) */
/* =========================================================================================================================== */
/* ================ SPIM0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Serial Peripheral Interface Master with EasyDMA 0 (SPIM0_NS)
*/
typedef struct { /*!< (@ 0x40008000) SPIM0_NS Structure */
__IM uint32_t RESERVED[4];
__OM uint32_t TASKS_START; /*!< (@ 0x00000010) Start SPI transaction */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000014) Stop SPI transaction */
__IM uint32_t RESERVED1;
__OM uint32_t TASKS_SUSPEND; /*!< (@ 0x0000001C) Suspend SPI transaction */
__OM uint32_t TASKS_RESUME; /*!< (@ 0x00000020) Resume SPI transaction */
__IM uint32_t RESERVED2[27];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000090) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000094) Subscribe configuration for task STOP */
__IM uint32_t RESERVED3;
__IOM uint32_t SUBSCRIBE_SUSPEND; /*!< (@ 0x0000009C) Subscribe configuration for task SUSPEND */
__IOM uint32_t SUBSCRIBE_RESUME; /*!< (@ 0x000000A0) Subscribe configuration for task RESUME */
__IM uint32_t RESERVED4[24];
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000104) SPI transaction has stopped */
__IM uint32_t RESERVED5[2];
__IOM uint32_t EVENTS_ENDRX; /*!< (@ 0x00000110) End of RXD buffer reached */
__IM uint32_t RESERVED6;
__IOM uint32_t EVENTS_END; /*!< (@ 0x00000118) End of RXD buffer and TXD buffer reached */
__IM uint32_t RESERVED7;
__IOM uint32_t EVENTS_ENDTX; /*!< (@ 0x00000120) End of TXD buffer reached */
__IM uint32_t RESERVED8[10];
__IOM uint32_t EVENTS_STARTED; /*!< (@ 0x0000014C) Transaction started */
__IM uint32_t RESERVED9[13];
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000184) Publish configuration for event STOPPED */
__IM uint32_t RESERVED10[2];
__IOM uint32_t PUBLISH_ENDRX; /*!< (@ 0x00000190) Publish configuration for event ENDRX */
__IM uint32_t RESERVED11;
__IOM uint32_t PUBLISH_END; /*!< (@ 0x00000198) Publish configuration for event END */
__IM uint32_t RESERVED12;
__IOM uint32_t PUBLISH_ENDTX; /*!< (@ 0x000001A0) Publish configuration for event ENDTX */
__IM uint32_t RESERVED13[10];
__IOM uint32_t PUBLISH_STARTED; /*!< (@ 0x000001CC) Publish configuration for event STARTED */
__IM uint32_t RESERVED14[12];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED15[64];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED16[125];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable SPIM */
__IM uint32_t RESERVED17;
__IOM SPIM_PSEL_Type PSEL; /*!< (@ 0x00000508) Unspecified */
__IM uint32_t RESERVED18[4];
__IOM uint32_t FREQUENCY; /*!< (@ 0x00000524) SPI frequency. Accuracy depends on the HFCLK
source selected. */
__IM uint32_t RESERVED19[3];
__IOM SPIM_RXD_Type RXD; /*!< (@ 0x00000534) RXD EasyDMA channel */
__IOM SPIM_TXD_Type TXD; /*!< (@ 0x00000544) TXD EasyDMA channel */
__IOM uint32_t CONFIG; /*!< (@ 0x00000554) Configuration register */
__IM uint32_t RESERVED20[26];
__IOM uint32_t ORC; /*!< (@ 0x000005C0) Over-read character. Character clocked out in
case an over-read of the TXD buffer. */
} NRF_SPIM_Type; /*!< Size = 1476 (0x5c4) */
/* =========================================================================================================================== */
/* ================ SPIS0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief SPI Slave 0 (SPIS0_NS)
*/
typedef struct { /*!< (@ 0x40008000) SPIS0_NS Structure */
__IM uint32_t RESERVED[9];
__OM uint32_t TASKS_ACQUIRE; /*!< (@ 0x00000024) Acquire SPI semaphore */
__OM uint32_t TASKS_RELEASE; /*!< (@ 0x00000028) Release SPI semaphore, enabling the SPI slave
to acquire it */
__IM uint32_t RESERVED1[30];
__IOM uint32_t SUBSCRIBE_ACQUIRE; /*!< (@ 0x000000A4) Subscribe configuration for task ACQUIRE */
__IOM uint32_t SUBSCRIBE_RELEASE; /*!< (@ 0x000000A8) Subscribe configuration for task RELEASE */
__IM uint32_t RESERVED2[22];
__IOM uint32_t EVENTS_END; /*!< (@ 0x00000104) Granted transaction completed */
__IM uint32_t RESERVED3[2];
__IOM uint32_t EVENTS_ENDRX; /*!< (@ 0x00000110) End of RXD buffer reached */
__IM uint32_t RESERVED4[5];
__IOM uint32_t EVENTS_ACQUIRED; /*!< (@ 0x00000128) Semaphore acquired */
__IM uint32_t RESERVED5[22];
__IOM uint32_t PUBLISH_END; /*!< (@ 0x00000184) Publish configuration for event END */
__IM uint32_t RESERVED6[2];
__IOM uint32_t PUBLISH_ENDRX; /*!< (@ 0x00000190) Publish configuration for event ENDRX */
__IM uint32_t RESERVED7[5];
__IOM uint32_t PUBLISH_ACQUIRED; /*!< (@ 0x000001A8) Publish configuration for event ACQUIRED */
__IM uint32_t RESERVED8[21];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED9[64];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED10[61];
__IM uint32_t SEMSTAT; /*!< (@ 0x00000400) Semaphore status register */
__IM uint32_t RESERVED11[15];
__IOM uint32_t STATUS; /*!< (@ 0x00000440) Status from last transaction */
__IM uint32_t RESERVED12[47];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable SPI slave */
__IM uint32_t RESERVED13;
__IOM SPIS_PSEL_Type PSEL; /*!< (@ 0x00000508) Unspecified */
__IM uint32_t RESERVED14[7];
__IOM SPIS_RXD_Type RXD; /*!< (@ 0x00000534) Unspecified */
__IOM SPIS_TXD_Type TXD; /*!< (@ 0x00000544) Unspecified */
__IOM uint32_t CONFIG; /*!< (@ 0x00000554) Configuration register */
__IM uint32_t RESERVED15;
__IOM uint32_t DEF; /*!< (@ 0x0000055C) Default character. Character clocked out in case
of an ignored transaction. */
__IM uint32_t RESERVED16[24];
__IOM uint32_t ORC; /*!< (@ 0x000005C0) Over-read character */
} NRF_SPIS_Type; /*!< Size = 1476 (0x5c4) */
/* =========================================================================================================================== */
/* ================ TWIM0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief I2C compatible Two-Wire Master Interface with EasyDMA 0 (TWIM0_NS)
*/
typedef struct { /*!< (@ 0x40008000) TWIM0_NS Structure */
__OM uint32_t TASKS_STARTRX; /*!< (@ 0x00000000) Start TWI receive sequence */
__IM uint32_t RESERVED;
__OM uint32_t TASKS_STARTTX; /*!< (@ 0x00000008) Start TWI transmit sequence */
__IM uint32_t RESERVED1[2];
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000014) Stop TWI transaction. Must be issued while the
TWI master is not suspended. */
__IM uint32_t RESERVED2;
__OM uint32_t TASKS_SUSPEND; /*!< (@ 0x0000001C) Suspend TWI transaction */
__OM uint32_t TASKS_RESUME; /*!< (@ 0x00000020) Resume TWI transaction */
__IM uint32_t RESERVED3[23];
__IOM uint32_t SUBSCRIBE_STARTRX; /*!< (@ 0x00000080) Subscribe configuration for task STARTRX */
__IM uint32_t RESERVED4;
__IOM uint32_t SUBSCRIBE_STARTTX; /*!< (@ 0x00000088) Subscribe configuration for task STARTTX */
__IM uint32_t RESERVED5[2];
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000094) Subscribe configuration for task STOP */
__IM uint32_t RESERVED6;
__IOM uint32_t SUBSCRIBE_SUSPEND; /*!< (@ 0x0000009C) Subscribe configuration for task SUSPEND */
__IOM uint32_t SUBSCRIBE_RESUME; /*!< (@ 0x000000A0) Subscribe configuration for task RESUME */
__IM uint32_t RESERVED7[24];
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000104) TWI stopped */
__IM uint32_t RESERVED8[7];
__IOM uint32_t EVENTS_ERROR; /*!< (@ 0x00000124) TWI error */
__IM uint32_t RESERVED9[8];
__IOM uint32_t EVENTS_SUSPENDED; /*!< (@ 0x00000148) SUSPEND task has been issued, TWI traffic is
now suspended. */
__IOM uint32_t EVENTS_RXSTARTED; /*!< (@ 0x0000014C) Receive sequence started */
__IOM uint32_t EVENTS_TXSTARTED; /*!< (@ 0x00000150) Transmit sequence started */
__IM uint32_t RESERVED10[2];
__IOM uint32_t EVENTS_LASTRX; /*!< (@ 0x0000015C) Byte boundary, starting to receive the last byte */
__IOM uint32_t EVENTS_LASTTX; /*!< (@ 0x00000160) Byte boundary, starting to transmit the last
byte */
__IM uint32_t RESERVED11[8];
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000184) Publish configuration for event STOPPED */
__IM uint32_t RESERVED12[7];
__IOM uint32_t PUBLISH_ERROR; /*!< (@ 0x000001A4) Publish configuration for event ERROR */
__IM uint32_t RESERVED13[8];
__IOM uint32_t PUBLISH_SUSPENDED; /*!< (@ 0x000001C8) Publish configuration for event SUSPENDED */
__IOM uint32_t PUBLISH_RXSTARTED; /*!< (@ 0x000001CC) Publish configuration for event RXSTARTED */
__IOM uint32_t PUBLISH_TXSTARTED; /*!< (@ 0x000001D0) Publish configuration for event TXSTARTED */
__IM uint32_t RESERVED14[2];
__IOM uint32_t PUBLISH_LASTRX; /*!< (@ 0x000001DC) Publish configuration for event LASTRX */
__IOM uint32_t PUBLISH_LASTTX; /*!< (@ 0x000001E0) Publish configuration for event LASTTX */
__IM uint32_t RESERVED15[7];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED16[63];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED17[110];
__IOM uint32_t ERRORSRC; /*!< (@ 0x000004C4) Error source */
__IM uint32_t RESERVED18[14];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable TWIM */
__IM uint32_t RESERVED19;
__IOM TWIM_PSEL_Type PSEL; /*!< (@ 0x00000508) Unspecified */
__IM uint32_t RESERVED20[5];
__IOM uint32_t FREQUENCY; /*!< (@ 0x00000524) TWI frequency. Accuracy depends on the HFCLK
source selected. */
__IM uint32_t RESERVED21[3];
__IOM TWIM_RXD_Type RXD; /*!< (@ 0x00000534) RXD EasyDMA channel */
__IOM TWIM_TXD_Type TXD; /*!< (@ 0x00000544) TXD EasyDMA channel */
__IM uint32_t RESERVED22[13];
__IOM uint32_t ADDRESS; /*!< (@ 0x00000588) Address used in the TWI transfer */
} NRF_TWIM_Type; /*!< Size = 1420 (0x58c) */
/* =========================================================================================================================== */
/* ================ TWIS0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief I2C compatible Two-Wire Slave Interface with EasyDMA 0 (TWIS0_NS)
*/
typedef struct { /*!< (@ 0x40008000) TWIS0_NS Structure */
__IM uint32_t RESERVED[5];
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000014) Stop TWI transaction */
__IM uint32_t RESERVED1;
__OM uint32_t TASKS_SUSPEND; /*!< (@ 0x0000001C) Suspend TWI transaction */
__OM uint32_t TASKS_RESUME; /*!< (@ 0x00000020) Resume TWI transaction */
__IM uint32_t RESERVED2[3];
__OM uint32_t TASKS_PREPARERX; /*!< (@ 0x00000030) Prepare the TWI slave to respond to a write command */
__OM uint32_t TASKS_PREPARETX; /*!< (@ 0x00000034) Prepare the TWI slave to respond to a read command */
__IM uint32_t RESERVED3[23];
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000094) Subscribe configuration for task STOP */
__IM uint32_t RESERVED4;
__IOM uint32_t SUBSCRIBE_SUSPEND; /*!< (@ 0x0000009C) Subscribe configuration for task SUSPEND */
__IOM uint32_t SUBSCRIBE_RESUME; /*!< (@ 0x000000A0) Subscribe configuration for task RESUME */
__IM uint32_t RESERVED5[3];
__IOM uint32_t SUBSCRIBE_PREPARERX; /*!< (@ 0x000000B0) Subscribe configuration for task PREPARERX */
__IOM uint32_t SUBSCRIBE_PREPARETX; /*!< (@ 0x000000B4) Subscribe configuration for task PREPARETX */
__IM uint32_t RESERVED6[19];
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000104) TWI stopped */
__IM uint32_t RESERVED7[7];
__IOM uint32_t EVENTS_ERROR; /*!< (@ 0x00000124) TWI error */
__IM uint32_t RESERVED8[9];
__IOM uint32_t EVENTS_RXSTARTED; /*!< (@ 0x0000014C) Receive sequence started */
__IOM uint32_t EVENTS_TXSTARTED; /*!< (@ 0x00000150) Transmit sequence started */
__IM uint32_t RESERVED9[4];
__IOM uint32_t EVENTS_WRITE; /*!< (@ 0x00000164) Write command received */
__IOM uint32_t EVENTS_READ; /*!< (@ 0x00000168) Read command received */
__IM uint32_t RESERVED10[6];
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000184) Publish configuration for event STOPPED */
__IM uint32_t RESERVED11[7];
__IOM uint32_t PUBLISH_ERROR; /*!< (@ 0x000001A4) Publish configuration for event ERROR */
__IM uint32_t RESERVED12[9];
__IOM uint32_t PUBLISH_RXSTARTED; /*!< (@ 0x000001CC) Publish configuration for event RXSTARTED */
__IOM uint32_t PUBLISH_TXSTARTED; /*!< (@ 0x000001D0) Publish configuration for event TXSTARTED */
__IM uint32_t RESERVED13[4];
__IOM uint32_t PUBLISH_WRITE; /*!< (@ 0x000001E4) Publish configuration for event WRITE */
__IOM uint32_t PUBLISH_READ; /*!< (@ 0x000001E8) Publish configuration for event READ */
__IM uint32_t RESERVED14[5];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED15[63];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED16[113];
__IOM uint32_t ERRORSRC; /*!< (@ 0x000004D0) Error source */
__IM uint32_t MATCH; /*!< (@ 0x000004D4) Status register indicating which address had
a match */
__IM uint32_t RESERVED17[10];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable TWIS */
__IM uint32_t RESERVED18;
__IOM TWIS_PSEL_Type PSEL; /*!< (@ 0x00000508) Unspecified */
__IM uint32_t RESERVED19[9];
__IOM TWIS_RXD_Type RXD; /*!< (@ 0x00000534) RXD EasyDMA channel */
__IOM TWIS_TXD_Type TXD; /*!< (@ 0x00000544) TXD EasyDMA channel */
__IM uint32_t RESERVED20[13];
__IOM uint32_t ADDRESS[2]; /*!< (@ 0x00000588) Description collection: TWI slave address n */
__IM uint32_t RESERVED21;
__IOM uint32_t CONFIG; /*!< (@ 0x00000594) Configuration register for the address match
mechanism */
__IM uint32_t RESERVED22[10];
__IOM uint32_t ORC; /*!< (@ 0x000005C0) Over-read character. Character sent out in case
of an over-read of the transmit buffer. */
} NRF_TWIS_Type; /*!< Size = 1476 (0x5c4) */
/* =========================================================================================================================== */
/* ================ UARTE0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief UART with EasyDMA 0 (UARTE0_NS)
*/
typedef struct { /*!< (@ 0x40008000) UARTE0_NS Structure */
__OM uint32_t TASKS_STARTRX; /*!< (@ 0x00000000) Start UART receiver */
__OM uint32_t TASKS_STOPRX; /*!< (@ 0x00000004) Stop UART receiver */
__OM uint32_t TASKS_STARTTX; /*!< (@ 0x00000008) Start UART transmitter */
__OM uint32_t TASKS_STOPTX; /*!< (@ 0x0000000C) Stop UART transmitter */
__IM uint32_t RESERVED[7];
__OM uint32_t TASKS_FLUSHRX; /*!< (@ 0x0000002C) Flush RX FIFO into RX buffer */
__IM uint32_t RESERVED1[20];
__IOM uint32_t SUBSCRIBE_STARTRX; /*!< (@ 0x00000080) Subscribe configuration for task STARTRX */
__IOM uint32_t SUBSCRIBE_STOPRX; /*!< (@ 0x00000084) Subscribe configuration for task STOPRX */
__IOM uint32_t SUBSCRIBE_STARTTX; /*!< (@ 0x00000088) Subscribe configuration for task STARTTX */
__IOM uint32_t SUBSCRIBE_STOPTX; /*!< (@ 0x0000008C) Subscribe configuration for task STOPTX */
__IM uint32_t RESERVED2[7];
__IOM uint32_t SUBSCRIBE_FLUSHRX; /*!< (@ 0x000000AC) Subscribe configuration for task FLUSHRX */
__IM uint32_t RESERVED3[20];
__IOM uint32_t EVENTS_CTS; /*!< (@ 0x00000100) CTS is activated (set low). Clear To Send. */
__IOM uint32_t EVENTS_NCTS; /*!< (@ 0x00000104) CTS is deactivated (set high). Not Clear To Send. */
__IOM uint32_t EVENTS_RXDRDY; /*!< (@ 0x00000108) Data received in RXD (but potentially not yet
transferred to Data RAM) */
__IM uint32_t RESERVED4;
__IOM uint32_t EVENTS_ENDRX; /*!< (@ 0x00000110) Receive buffer is filled up */
__IM uint32_t RESERVED5[2];
__IOM uint32_t EVENTS_TXDRDY; /*!< (@ 0x0000011C) Data sent from TXD */
__IOM uint32_t EVENTS_ENDTX; /*!< (@ 0x00000120) Last TX byte transmitted */
__IOM uint32_t EVENTS_ERROR; /*!< (@ 0x00000124) Error detected */
__IM uint32_t RESERVED6[7];
__IOM uint32_t EVENTS_RXTO; /*!< (@ 0x00000144) Receiver timeout */
__IM uint32_t RESERVED7;
__IOM uint32_t EVENTS_RXSTARTED; /*!< (@ 0x0000014C) UART receiver has started */
__IOM uint32_t EVENTS_TXSTARTED; /*!< (@ 0x00000150) UART transmitter has started */
__IM uint32_t RESERVED8;
__IOM uint32_t EVENTS_TXSTOPPED; /*!< (@ 0x00000158) Transmitter stopped */
__IM uint32_t RESERVED9[9];
__IOM uint32_t PUBLISH_CTS; /*!< (@ 0x00000180) Publish configuration for event CTS */
__IOM uint32_t PUBLISH_NCTS; /*!< (@ 0x00000184) Publish configuration for event NCTS */
__IOM uint32_t PUBLISH_RXDRDY; /*!< (@ 0x00000188) Publish configuration for event RXDRDY */
__IM uint32_t RESERVED10;
__IOM uint32_t PUBLISH_ENDRX; /*!< (@ 0x00000190) Publish configuration for event ENDRX */
__IM uint32_t RESERVED11[2];
__IOM uint32_t PUBLISH_TXDRDY; /*!< (@ 0x0000019C) Publish configuration for event TXDRDY */
__IOM uint32_t PUBLISH_ENDTX; /*!< (@ 0x000001A0) Publish configuration for event ENDTX */
__IOM uint32_t PUBLISH_ERROR; /*!< (@ 0x000001A4) Publish configuration for event ERROR */
__IM uint32_t RESERVED12[7];
__IOM uint32_t PUBLISH_RXTO; /*!< (@ 0x000001C4) Publish configuration for event RXTO */
__IM uint32_t RESERVED13;
__IOM uint32_t PUBLISH_RXSTARTED; /*!< (@ 0x000001CC) Publish configuration for event RXSTARTED */
__IOM uint32_t PUBLISH_TXSTARTED; /*!< (@ 0x000001D0) Publish configuration for event TXSTARTED */
__IM uint32_t RESERVED14;
__IOM uint32_t PUBLISH_TXSTOPPED; /*!< (@ 0x000001D8) Publish configuration for event TXSTOPPED */
__IM uint32_t RESERVED15[9];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED16[63];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED17[93];
__IOM uint32_t ERRORSRC; /*!< (@ 0x00000480) Error source Note : this register is read / write
one to clear. */
__IM uint32_t RESERVED18[31];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable UART */
__IM uint32_t RESERVED19;
__IOM UARTE_PSEL_Type PSEL; /*!< (@ 0x00000508) Unspecified */
__IM uint32_t RESERVED20[3];
__IOM uint32_t BAUDRATE; /*!< (@ 0x00000524) Baud rate. Accuracy depends on the HFCLK source
selected. */
__IM uint32_t RESERVED21[3];
__IOM UARTE_RXD_Type RXD; /*!< (@ 0x00000534) RXD EasyDMA channel */
__IM uint32_t RESERVED22;
__IOM UARTE_TXD_Type TXD; /*!< (@ 0x00000544) TXD EasyDMA channel */
__IM uint32_t RESERVED23[7];
__IOM uint32_t CONFIG; /*!< (@ 0x0000056C) Configuration of parity and hardware flow control */
} NRF_UARTE_Type; /*!< Size = 1392 (0x570) */
/* =========================================================================================================================== */
/* ================ GPIOTE0_S ================ */
/* =========================================================================================================================== */
/**
* @brief GPIO Tasks and Events 0 (GPIOTE0_S)
*/
typedef struct { /*!< (@ 0x5000D000) GPIOTE0_S Structure */
__OM uint32_t TASKS_OUT[8]; /*!< (@ 0x00000000) Description collection: Task for writing to pin
specified in CONFIG[n].PSEL. Action on pin
is configured in CONFIG[n].POLARITY. */
__IM uint32_t RESERVED[4];
__OM uint32_t TASKS_SET[8]; /*!< (@ 0x00000030) Description collection: Task for writing to pin
specified in CONFIG[n].PSEL. Action on pin
is to set it high. */
__IM uint32_t RESERVED1[4];
__OM uint32_t TASKS_CLR[8]; /*!< (@ 0x00000060) Description collection: Task for writing to pin
specified in CONFIG[n].PSEL. Action on pin
is to set it low. */
__IOM uint32_t SUBSCRIBE_OUT[8]; /*!< (@ 0x00000080) Description collection: Subscribe configuration
for task OUT[n] */
__IM uint32_t RESERVED2[4];
__IOM uint32_t SUBSCRIBE_SET[8]; /*!< (@ 0x000000B0) Description collection: Subscribe configuration
for task SET[n] */
__IM uint32_t RESERVED3[4];
__IOM uint32_t SUBSCRIBE_CLR[8]; /*!< (@ 0x000000E0) Description collection: Subscribe configuration
for task CLR[n] */
__IOM uint32_t EVENTS_IN[8]; /*!< (@ 0x00000100) Description collection: Event generated from
pin specified in CONFIG[n].PSEL */
__IM uint32_t RESERVED4[23];
__IOM uint32_t EVENTS_PORT; /*!< (@ 0x0000017C) Event generated from multiple input GPIO pins
with SENSE mechanism enabled */
__IOM uint32_t PUBLISH_IN[8]; /*!< (@ 0x00000180) Description collection: Publish configuration
for event IN[n] */
__IM uint32_t RESERVED5[23];
__IOM uint32_t PUBLISH_PORT; /*!< (@ 0x000001FC) Publish configuration for event PORT */
__IM uint32_t RESERVED6[65];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED7[129];
__IOM uint32_t CONFIG[8]; /*!< (@ 0x00000510) Description collection: Configuration for OUT[n],
SET[n] and CLR[n] tasks and IN[n] event */
} NRF_GPIOTE_Type; /*!< Size = 1328 (0x530) */
/* =========================================================================================================================== */
/* ================ SAADC_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Analog to Digital Converter 0 (SAADC_NS)
*/
typedef struct { /*!< (@ 0x4000E000) SAADC_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Start the ADC and prepare the result buffer in
RAM */
__OM uint32_t TASKS_SAMPLE; /*!< (@ 0x00000004) Take one ADC sample, if scan is enabled all channels
are sampled */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000008) Stop the ADC and terminate any on-going conversion */
__OM uint32_t TASKS_CALIBRATEOFFSET; /*!< (@ 0x0000000C) Starts offset auto-calibration */
__IM uint32_t RESERVED[28];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_SAMPLE; /*!< (@ 0x00000084) Subscribe configuration for task SAMPLE */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000088) Subscribe configuration for task STOP */
__IOM uint32_t SUBSCRIBE_CALIBRATEOFFSET; /*!< (@ 0x0000008C) Subscribe configuration for task CALIBRATEOFFSET */
__IM uint32_t RESERVED1[28];
__IOM uint32_t EVENTS_STARTED; /*!< (@ 0x00000100) The ADC has started */
__IOM uint32_t EVENTS_END; /*!< (@ 0x00000104) The ADC has filled up the Result buffer */
__IOM uint32_t EVENTS_DONE; /*!< (@ 0x00000108) A conversion task has been completed. Depending
on the mode, multiple conversions might
be needed for a result to be transferred
to RAM. */
__IOM uint32_t EVENTS_RESULTDONE; /*!< (@ 0x0000010C) A result is ready to get transferred to RAM. */
__IOM uint32_t EVENTS_CALIBRATEDONE; /*!< (@ 0x00000110) Calibration is complete */
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000114) The ADC has stopped */
__IOM SAADC_EVENTS_CH_Type EVENTS_CH[8]; /*!< (@ 0x00000118) Peripheral events. */
__IM uint32_t RESERVED2[10];
__IOM uint32_t PUBLISH_STARTED; /*!< (@ 0x00000180) Publish configuration for event STARTED */
__IOM uint32_t PUBLISH_END; /*!< (@ 0x00000184) Publish configuration for event END */
__IOM uint32_t PUBLISH_DONE; /*!< (@ 0x00000188) Publish configuration for event DONE */
__IOM uint32_t PUBLISH_RESULTDONE; /*!< (@ 0x0000018C) Publish configuration for event RESULTDONE */
__IOM uint32_t PUBLISH_CALIBRATEDONE; /*!< (@ 0x00000190) Publish configuration for event CALIBRATEDONE */
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000194) Publish configuration for event STOPPED */
__IOM SAADC_PUBLISH_CH_Type PUBLISH_CH[8]; /*!< (@ 0x00000198) Publish configuration for events */
__IM uint32_t RESERVED3[74];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED4[61];
__IM uint32_t STATUS; /*!< (@ 0x00000400) Status */
__IM uint32_t RESERVED5[63];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable or disable ADC */
__IM uint32_t RESERVED6[3];
__IOM SAADC_CH_Type CH[8]; /*!< (@ 0x00000510) Unspecified */
__IM uint32_t RESERVED7[24];
__IOM uint32_t RESOLUTION; /*!< (@ 0x000005F0) Resolution configuration */
__IOM uint32_t OVERSAMPLE; /*!< (@ 0x000005F4) Oversampling configuration. OVERSAMPLE should
not be combined with SCAN. The RESOLUTION
is applied before averaging, thus for high
OVERSAMPLE a higher RESOLUTION should be
used. */
__IOM uint32_t SAMPLERATE; /*!< (@ 0x000005F8) Controls normal or continuous sample rate */
__IM uint32_t RESERVED8[12];
__IOM SAADC_RESULT_Type RESULT; /*!< (@ 0x0000062C) RESULT EasyDMA channel */
} NRF_SAADC_Type; /*!< Size = 1592 (0x638) */
/* =========================================================================================================================== */
/* ================ TIMER0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Timer/Counter 0 (TIMER0_NS)
*/
typedef struct { /*!< (@ 0x4000F000) TIMER0_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Start Timer */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000004) Stop Timer */
__OM uint32_t TASKS_COUNT; /*!< (@ 0x00000008) Increment Timer (Counter mode only) */
__OM uint32_t TASKS_CLEAR; /*!< (@ 0x0000000C) Clear time */
__OM uint32_t TASKS_SHUTDOWN; /*!< (@ 0x00000010) Deprecated register - Shut down timer */
__IM uint32_t RESERVED[11];
__OM uint32_t TASKS_CAPTURE[6]; /*!< (@ 0x00000040) Description collection: Capture Timer value to
CC[n] register */
__IM uint32_t RESERVED1[10];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000084) Subscribe configuration for task STOP */
__IOM uint32_t SUBSCRIBE_COUNT; /*!< (@ 0x00000088) Subscribe configuration for task COUNT */
__IOM uint32_t SUBSCRIBE_CLEAR; /*!< (@ 0x0000008C) Subscribe configuration for task CLEAR */
__IOM uint32_t SUBSCRIBE_SHUTDOWN; /*!< (@ 0x00000090) Deprecated register - Subscribe configuration
for task SHUTDOWN */
__IM uint32_t RESERVED2[11];
__IOM uint32_t SUBSCRIBE_CAPTURE[6]; /*!< (@ 0x000000C0) Description collection: Subscribe configuration
for task CAPTURE[n] */
__IM uint32_t RESERVED3[26];
__IOM uint32_t EVENTS_COMPARE[6]; /*!< (@ 0x00000140) Description collection: Compare event on CC[n]
match */
__IM uint32_t RESERVED4[26];
__IOM uint32_t PUBLISH_COMPARE[6]; /*!< (@ 0x000001C0) Description collection: Publish configuration
for event COMPARE[n] */
__IM uint32_t RESERVED5[10];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED6[64];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED7[126];
__IOM uint32_t MODE; /*!< (@ 0x00000504) Timer mode selection */
__IOM uint32_t BITMODE; /*!< (@ 0x00000508) Configure the number of bits used by the TIMER */
__IM uint32_t RESERVED8;
__IOM uint32_t PRESCALER; /*!< (@ 0x00000510) Timer prescaler register */
__IOM uint32_t ONESHOTEN[6]; /*!< (@ 0x00000514) Description collection: Enable one-shot operation
for Capture/Compare channel n */
__IM uint32_t RESERVED9[5];
__IOM uint32_t CC[6]; /*!< (@ 0x00000540) Description collection: Capture/Compare register
n */
} NRF_TIMER_Type; /*!< Size = 1368 (0x558) */
/* =========================================================================================================================== */
/* ================ RTC0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Real-time counter 0 (RTC0_NS)
*/
typedef struct { /*!< (@ 0x40014000) RTC0_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Start RTC counter */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000004) Stop RTC counter */
__OM uint32_t TASKS_CLEAR; /*!< (@ 0x00000008) Clear RTC counter */
__OM uint32_t TASKS_TRIGOVRFLW; /*!< (@ 0x0000000C) Set counter to 0xFFFFF0 */
__IM uint32_t RESERVED[28];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000084) Subscribe configuration for task STOP */
__IOM uint32_t SUBSCRIBE_CLEAR; /*!< (@ 0x00000088) Subscribe configuration for task CLEAR */
__IOM uint32_t SUBSCRIBE_TRIGOVRFLW; /*!< (@ 0x0000008C) Subscribe configuration for task TRIGOVRFLW */
__IM uint32_t RESERVED1[28];
__IOM uint32_t EVENTS_TICK; /*!< (@ 0x00000100) Event on counter increment */
__IOM uint32_t EVENTS_OVRFLW; /*!< (@ 0x00000104) Event on counter overflow */
__IM uint32_t RESERVED2[14];
__IOM uint32_t EVENTS_COMPARE[4]; /*!< (@ 0x00000140) Description collection: Compare event on CC[n]
match */
__IM uint32_t RESERVED3[12];
__IOM uint32_t PUBLISH_TICK; /*!< (@ 0x00000180) Publish configuration for event TICK */
__IOM uint32_t PUBLISH_OVRFLW; /*!< (@ 0x00000184) Publish configuration for event OVRFLW */
__IM uint32_t RESERVED4[14];
__IOM uint32_t PUBLISH_COMPARE[4]; /*!< (@ 0x000001C0) Description collection: Publish configuration
for event COMPARE[n] */
__IM uint32_t RESERVED5[77];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED6[13];
__IOM uint32_t EVTEN; /*!< (@ 0x00000340) Enable or disable event routing */
__IOM uint32_t EVTENSET; /*!< (@ 0x00000344) Enable event routing */
__IOM uint32_t EVTENCLR; /*!< (@ 0x00000348) Disable event routing */
__IM uint32_t RESERVED7[110];
__IM uint32_t COUNTER; /*!< (@ 0x00000504) Current counter value */
__IOM uint32_t PRESCALER; /*!< (@ 0x00000508) 12-bit prescaler for counter frequency (32768/(PRESCALER+1)).
Must be written when RTC is stopped. */
__IM uint32_t RESERVED8[13];
__IOM uint32_t CC[4]; /*!< (@ 0x00000540) Description collection: Compare register n */
} NRF_RTC_Type; /*!< Size = 1360 (0x550) */
/* =========================================================================================================================== */
/* ================ DPPIC_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Distributed Programmable Peripheral Interconnect Controller 0 (DPPIC_NS)
*/
typedef struct { /*!< (@ 0x40017000) DPPIC_NS Structure */
__OM DPPIC_TASKS_CHG_Type TASKS_CHG[6]; /*!< (@ 0x00000000) Channel group tasks */
__IM uint32_t RESERVED[20];
__IOM DPPIC_SUBSCRIBE_CHG_Type SUBSCRIBE_CHG[6];/*!< (@ 0x00000080) Subscribe configuration for tasks */
__IM uint32_t RESERVED1[276];
__IOM uint32_t CHEN; /*!< (@ 0x00000500) Channel enable register */
__IOM uint32_t CHENSET; /*!< (@ 0x00000504) Channel enable set register */
__IOM uint32_t CHENCLR; /*!< (@ 0x00000508) Channel enable clear register */
__IM uint32_t RESERVED2[189];
__IOM uint32_t CHG[6]; /*!< (@ 0x00000800) Description collection: Channel group n Note:
Writes to this register is ignored if either
SUBSCRIBE_CHG[n].EN/DIS are enabled. */
} NRF_DPPIC_Type; /*!< Size = 2072 (0x818) */
/* =========================================================================================================================== */
/* ================ WDT_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Watchdog Timer 0 (WDT_NS)
*/
typedef struct { /*!< (@ 0x40018000) WDT_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Start the watchdog */
__IM uint32_t RESERVED[31];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IM uint32_t RESERVED1[31];
__IOM uint32_t EVENTS_TIMEOUT; /*!< (@ 0x00000100) Watchdog timeout */
__IM uint32_t RESERVED2[31];
__IOM uint32_t PUBLISH_TIMEOUT; /*!< (@ 0x00000180) Publish configuration for event TIMEOUT */
__IM uint32_t RESERVED3[96];
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED4[61];
__IM uint32_t RUNSTATUS; /*!< (@ 0x00000400) Run status */
__IM uint32_t REQSTATUS; /*!< (@ 0x00000404) Request status */
__IM uint32_t RESERVED5[63];
__IOM uint32_t CRV; /*!< (@ 0x00000504) Counter reload value */
__IOM uint32_t RREN; /*!< (@ 0x00000508) Enable register for reload request registers */
__IOM uint32_t CONFIG; /*!< (@ 0x0000050C) Configuration register */
__IM uint32_t RESERVED6[60];
__OM uint32_t RR[8]; /*!< (@ 0x00000600) Description collection: Reload request n */
} NRF_WDT_Type; /*!< Size = 1568 (0x620) */
/* =========================================================================================================================== */
/* ================ EGU0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Event generator unit 0 (EGU0_NS)
*/
typedef struct { /*!< (@ 0x4001B000) EGU0_NS Structure */
__OM uint32_t TASKS_TRIGGER[16]; /*!< (@ 0x00000000) Description collection: Trigger n for triggering
the corresponding TRIGGERED[n] event */
__IM uint32_t RESERVED[16];
__IOM uint32_t SUBSCRIBE_TRIGGER[16]; /*!< (@ 0x00000080) Description collection: Subscribe configuration
for task TRIGGER[n] */
__IM uint32_t RESERVED1[16];
__IOM uint32_t EVENTS_TRIGGERED[16]; /*!< (@ 0x00000100) Description collection: Event number n generated
by triggering the corresponding TRIGGER[n]
task */
__IM uint32_t RESERVED2[16];
__IOM uint32_t PUBLISH_TRIGGERED[16]; /*!< (@ 0x00000180) Description collection: Publish configuration
for event TRIGGERED[n] */
__IM uint32_t RESERVED3[80];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
} NRF_EGU_Type; /*!< Size = 780 (0x30c) */
/* =========================================================================================================================== */
/* ================ PWM0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Pulse width modulation unit 0 (PWM0_NS)
*/
typedef struct { /*!< (@ 0x40021000) PWM0_NS Structure */
__IM uint32_t RESERVED;
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000004) Stops PWM pulse generation on all channels at
the end of current PWM period, and stops
sequence playback */
__OM uint32_t TASKS_SEQSTART[2]; /*!< (@ 0x00000008) Description collection: Loads the first PWM value
on all enabled channels from sequence n,
and starts playing that sequence at the
rate defined in SEQ[n]REFRESH and/or DECODER.MODE.
Causes PWM generation to start if not running. */
__OM uint32_t TASKS_NEXTSTEP; /*!< (@ 0x00000010) Steps by one value in the current sequence on
all enabled channels if DECODER.MODE=NextStep.
Does not cause PWM generation to start if
not running. */
__IM uint32_t RESERVED1[28];
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000084) Subscribe configuration for task STOP */
__IOM uint32_t SUBSCRIBE_SEQSTART[2]; /*!< (@ 0x00000088) Description collection: Subscribe configuration
for task SEQSTART[n] */
__IOM uint32_t SUBSCRIBE_NEXTSTEP; /*!< (@ 0x00000090) Subscribe configuration for task NEXTSTEP */
__IM uint32_t RESERVED2[28];
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000104) Response to STOP task, emitted when PWM pulses
are no longer generated */
__IOM uint32_t EVENTS_SEQSTARTED[2]; /*!< (@ 0x00000108) Description collection: First PWM period started
on sequence n */
__IOM uint32_t EVENTS_SEQEND[2]; /*!< (@ 0x00000110) Description collection: Emitted at end of every
sequence n, when last value from RAM has
been applied to wave counter */
__IOM uint32_t EVENTS_PWMPERIODEND; /*!< (@ 0x00000118) Emitted at the end of each PWM period */
__IOM uint32_t EVENTS_LOOPSDONE; /*!< (@ 0x0000011C) Concatenated sequences have been played the amount
of times defined in LOOP.CNT */
__IM uint32_t RESERVED3[25];
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000184) Publish configuration for event STOPPED */
__IOM uint32_t PUBLISH_SEQSTARTED[2]; /*!< (@ 0x00000188) Description collection: Publish configuration
for event SEQSTARTED[n] */
__IOM uint32_t PUBLISH_SEQEND[2]; /*!< (@ 0x00000190) Description collection: Publish configuration
for event SEQEND[n] */
__IOM uint32_t PUBLISH_PWMPERIODEND; /*!< (@ 0x00000198) Publish configuration for event PWMPERIODEND */
__IOM uint32_t PUBLISH_LOOPSDONE; /*!< (@ 0x0000019C) Publish configuration for event LOOPSDONE */
__IM uint32_t RESERVED4[24];
__IOM uint32_t SHORTS; /*!< (@ 0x00000200) Shortcuts between local events and tasks */
__IM uint32_t RESERVED5[63];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED6[125];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) PWM module enable register */
__IOM uint32_t MODE; /*!< (@ 0x00000504) Selects operating mode of the wave counter */
__IOM uint32_t COUNTERTOP; /*!< (@ 0x00000508) Value up to which the pulse generator counter
counts */
__IOM uint32_t PRESCALER; /*!< (@ 0x0000050C) Configuration for PWM_CLK */
__IOM uint32_t DECODER; /*!< (@ 0x00000510) Configuration of the decoder */
__IOM uint32_t LOOP; /*!< (@ 0x00000514) Number of playbacks of a loop */
__IM uint32_t RESERVED7[2];
__IOM PWM_SEQ_Type SEQ[2]; /*!< (@ 0x00000520) Unspecified */
__IOM PWM_PSEL_Type PSEL; /*!< (@ 0x00000560) Unspecified */
} NRF_PWM_Type; /*!< Size = 1392 (0x570) */
/* =========================================================================================================================== */
/* ================ PDM_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Pulse Density Modulation (Digital Microphone) Interface 0 (PDM_NS)
*/
typedef struct { /*!< (@ 0x40026000) PDM_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Starts continuous PDM transfer */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000004) Stops PDM transfer */
__IM uint32_t RESERVED[30];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000084) Subscribe configuration for task STOP */
__IM uint32_t RESERVED1[30];
__IOM uint32_t EVENTS_STARTED; /*!< (@ 0x00000100) PDM transfer has started */
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000104) PDM transfer has finished */
__IOM uint32_t EVENTS_END; /*!< (@ 0x00000108) The PDM has written the last sample specified
by SAMPLE.MAXCNT (or the last sample after
a STOP task has been received) to Data RAM */
__IM uint32_t RESERVED2[29];
__IOM uint32_t PUBLISH_STARTED; /*!< (@ 0x00000180) Publish configuration for event STARTED */
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000184) Publish configuration for event STOPPED */
__IOM uint32_t PUBLISH_END; /*!< (@ 0x00000188) Publish configuration for event END */
__IM uint32_t RESERVED3[93];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED4[125];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) PDM module enable register */
__IOM uint32_t PDMCLKCTRL; /*!< (@ 0x00000504) PDM clock generator control */
__IOM uint32_t MODE; /*!< (@ 0x00000508) Defines the routing of the connected PDM microphones'
signals */
__IM uint32_t RESERVED5[3];
__IOM uint32_t GAINL; /*!< (@ 0x00000518) Left output gain adjustment */
__IOM uint32_t GAINR; /*!< (@ 0x0000051C) Right output gain adjustment */
__IOM uint32_t RATIO; /*!< (@ 0x00000520) Selects the ratio between PDM_CLK and output
sample rate. Change PDMCLKCTRL accordingly. */
__IM uint32_t RESERVED6[7];
__IOM PDM_PSEL_Type PSEL; /*!< (@ 0x00000540) Unspecified */
__IM uint32_t RESERVED7[6];
__IOM PDM_SAMPLE_Type SAMPLE; /*!< (@ 0x00000560) Unspecified */
} NRF_PDM_Type; /*!< Size = 1384 (0x568) */
/* =========================================================================================================================== */
/* ================ I2S_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Inter-IC Sound 0 (I2S_NS)
*/
typedef struct { /*!< (@ 0x40028000) I2S_NS Structure */
__OM uint32_t TASKS_START; /*!< (@ 0x00000000) Starts continuous I2S transfer. Also starts MCK
generator when this is enabled. */
__OM uint32_t TASKS_STOP; /*!< (@ 0x00000004) Stops I2S transfer. Also stops MCK generator.
Triggering this task will cause the STOPPED
event to be generated. */
__IM uint32_t RESERVED[30];
__IOM uint32_t SUBSCRIBE_START; /*!< (@ 0x00000080) Subscribe configuration for task START */
__IOM uint32_t SUBSCRIBE_STOP; /*!< (@ 0x00000084) Subscribe configuration for task STOP */
__IM uint32_t RESERVED1[31];
__IOM uint32_t EVENTS_RXPTRUPD; /*!< (@ 0x00000104) The RXD.PTR register has been copied to internal
double-buffers. When the I2S module is started
and RX is enabled, this event will be generated
for every RXTXD.MAXCNT words that are received
on the SDIN pin. */
__IOM uint32_t EVENTS_STOPPED; /*!< (@ 0x00000108) I2S transfer stopped. */
__IM uint32_t RESERVED2[2];
__IOM uint32_t EVENTS_TXPTRUPD; /*!< (@ 0x00000114) The TDX.PTR register has been copied to internal
double-buffers. When the I2S module is started
and TX is enabled, this event will be generated
for every RXTXD.MAXCNT words that are sent
on the SDOUT pin. */
__IM uint32_t RESERVED3[27];
__IOM uint32_t PUBLISH_RXPTRUPD; /*!< (@ 0x00000184) Publish configuration for event RXPTRUPD */
__IOM uint32_t PUBLISH_STOPPED; /*!< (@ 0x00000188) Publish configuration for event STOPPED */
__IM uint32_t RESERVED4[2];
__IOM uint32_t PUBLISH_TXPTRUPD; /*!< (@ 0x00000194) Publish configuration for event TXPTRUPD */
__IM uint32_t RESERVED5[90];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t RESERVED6[125];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable I2S module. */
__IOM I2S_CONFIG_Type CONFIG; /*!< (@ 0x00000504) Unspecified */
__IM uint32_t RESERVED7[3];
__IOM I2S_RXD_Type RXD; /*!< (@ 0x00000538) Unspecified */
__IM uint32_t RESERVED8;
__IOM I2S_TXD_Type TXD; /*!< (@ 0x00000540) Unspecified */
__IM uint32_t RESERVED9[3];
__IOM I2S_RXTXD_Type RXTXD; /*!< (@ 0x00000550) Unspecified */
__IM uint32_t RESERVED10[3];
__IOM I2S_PSEL_Type PSEL; /*!< (@ 0x00000560) Unspecified */
} NRF_I2S_Type; /*!< Size = 1396 (0x574) */
/* =========================================================================================================================== */
/* ================ IPC_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Inter Processor Communication 0 (IPC_NS)
*/
typedef struct { /*!< (@ 0x4002A000) IPC_NS Structure */
__OM uint32_t TASKS_SEND[8]; /*!< (@ 0x00000000) Description collection: Trigger events on channel
enabled in SEND_CNF[n]. */
__IM uint32_t RESERVED[24];
__IOM uint32_t SUBSCRIBE_SEND[8]; /*!< (@ 0x00000080) Description collection: Subscribe configuration
for task SEND[n] */
__IM uint32_t RESERVED1[24];
__IOM uint32_t EVENTS_RECEIVE[8]; /*!< (@ 0x00000100) Description collection: Event received on one
or more of the enabled channels in RECEIVE_CNF[n]. */
__IM uint32_t RESERVED2[24];
__IOM uint32_t PUBLISH_RECEIVE[8]; /*!< (@ 0x00000180) Description collection: Publish configuration
for event RECEIVE[n] */
__IM uint32_t RESERVED3[88];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t INTPEND; /*!< (@ 0x0000030C) Pending interrupts */
__IM uint32_t RESERVED4[128];
__IOM uint32_t SEND_CNF[8]; /*!< (@ 0x00000510) Description collection: Send event configuration
for TASKS_SEND[n]. */
__IM uint32_t RESERVED5[24];
__IOM uint32_t RECEIVE_CNF[8]; /*!< (@ 0x00000590) Description collection: Receive event configuration
for EVENTS_RECEIVE[n]. */
__IM uint32_t RESERVED6[24];
__IOM uint32_t GPMEM[4]; /*!< (@ 0x00000610) Description collection: General purpose memory. */
} NRF_IPC_Type; /*!< Size = 1568 (0x620) */
/* =========================================================================================================================== */
/* ================ FPU_NS ================ */
/* =========================================================================================================================== */
/**
* @brief FPU 0 (FPU_NS)
*/
typedef struct { /*!< (@ 0x4002C000) FPU_NS Structure */
__IM uint32_t UNUSED; /*!< (@ 0x00000000) Unused. */
} NRF_FPU_Type; /*!< Size = 4 (0x4) */
/* =========================================================================================================================== */
/* ================ KMU_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Key management unit 0 (KMU_NS)
*/
typedef struct { /*!< (@ 0x40039000) KMU_NS Structure */
__OM uint32_t TASKS_PUSH_KEYSLOT; /*!< (@ 0x00000000) Push a key slot over secure APB */
__IM uint32_t RESERVED[63];
__IOM uint32_t EVENTS_KEYSLOT_PUSHED; /*!< (@ 0x00000100) Key slot successfully pushed over secure APB */
__IOM uint32_t EVENTS_KEYSLOT_REVOKED; /*!< (@ 0x00000104) Key slot has been revoked and cannot be tasked
for selection */
__IOM uint32_t EVENTS_KEYSLOT_ERROR; /*!< (@ 0x00000108) No key slot selected, no destination address
defined, or error during push operation */
__IM uint32_t RESERVED1[125];
__IOM uint32_t INTEN; /*!< (@ 0x00000300) Enable or disable interrupt */
__IOM uint32_t INTENSET; /*!< (@ 0x00000304) Enable interrupt */
__IOM uint32_t INTENCLR; /*!< (@ 0x00000308) Disable interrupt */
__IM uint32_t INTPEND; /*!< (@ 0x0000030C) Pending interrupts */
__IM uint32_t RESERVED2[63];
__IM uint32_t STATUS; /*!< (@ 0x0000040C) Status bits for KMU operation */
__IM uint32_t RESERVED3[60];
__IOM uint32_t SELECTKEYSLOT; /*!< (@ 0x00000500) Select key slot to be read over AHB or pushed
over secure APB when TASKS_PUSH_KEYSLOT
is started */
} NRF_KMU_Type; /*!< Size = 1284 (0x504) */
/* =========================================================================================================================== */
/* ================ NVMC_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Non-volatile memory controller 0 (NVMC_NS)
*/
typedef struct { /*!< (@ 0x40039000) NVMC_NS Structure */
__IM uint32_t RESERVED[256];
__IM uint32_t READY; /*!< (@ 0x00000400) Ready flag */
__IM uint32_t RESERVED1;
__IM uint32_t READYNEXT; /*!< (@ 0x00000408) Ready flag */
__IM uint32_t RESERVED2[62];
__IOM uint32_t CONFIG; /*!< (@ 0x00000504) Configuration register */
__IM uint32_t RESERVED3;
__OM uint32_t ERASEALL; /*!< (@ 0x0000050C) Register for erasing all non-volatile user memory */
__IM uint32_t RESERVED4[3];
__IOM uint32_t ERASEPAGEPARTIALCFG; /*!< (@ 0x0000051C) Register for partial erase configuration */
__IM uint32_t RESERVED5[8];
__IOM uint32_t ICACHECNF; /*!< (@ 0x00000540) I-code cache configuration register */
__IM uint32_t RESERVED6;
__IOM uint32_t IHIT; /*!< (@ 0x00000548) I-code cache hit counter */
__IOM uint32_t IMISS; /*!< (@ 0x0000054C) I-code cache miss counter */
__IM uint32_t RESERVED7[13];
__IOM uint32_t CONFIGNS; /*!< (@ 0x00000584) Unspecified */
__OM uint32_t WRITEUICRNS; /*!< (@ 0x00000588) Non-secure APPROTECT enable register */
} NRF_NVMC_Type; /*!< Size = 1420 (0x58c) */
/* =========================================================================================================================== */
/* ================ VMC_NS ================ */
/* =========================================================================================================================== */
/**
* @brief Volatile Memory controller 0 (VMC_NS)
*/
typedef struct { /*!< (@ 0x4003A000) VMC_NS Structure */
__IM uint32_t RESERVED[384];
__IOM VMC_RAM_Type RAM[8]; /*!< (@ 0x00000600) Unspecified */
} NRF_VMC_Type; /*!< Size = 1664 (0x680) */
/* =========================================================================================================================== */
/* ================ CC_HOST_RGF_S ================ */
/* =========================================================================================================================== */
/**
* @brief CRYPTOCELL HOST_RGF interface (CC_HOST_RGF_S)
*/
typedef struct { /*!< (@ 0x50840000) CC_HOST_RGF_S Structure */
__IM uint32_t RESERVED[1678];
__IOM uint32_t HOST_CRYPTOKEY_SEL; /*!< (@ 0x00001A38) AES hardware key select */
__IM uint32_t RESERVED1[4];
__IOM uint32_t HOST_IOT_KPRTL_LOCK; /*!< (@ 0x00001A4C) This write-once register is the K_PRTL lock register.
When this register is set, K_PRTL cannot
be used and a zeroed key will be used instead.
The value of this register is saved in the
CRYPTOCELL AO power domain. */
__IOM uint32_t HOST_IOT_KDR0; /*!< (@ 0x00001A50) This register holds bits 31:0 of K_DR. The value
of this register is saved in the CRYPTOCELL
AO power domain. Reading from this address
returns the K_DR valid status indicating
if K_DR is successfully retained. */
__OM uint32_t HOST_IOT_KDR1; /*!< (@ 0x00001A54) This register holds bits 63:32 of K_DR. The value
of this register is saved in the CRYPTOCELL
AO power domain. */
__OM uint32_t HOST_IOT_KDR2; /*!< (@ 0x00001A58) This register holds bits 95:64 of K_DR. The value
of this register is saved in the CRYPTOCELL
AO power domain. */
__OM uint32_t HOST_IOT_KDR3; /*!< (@ 0x00001A5C) This register holds bits 127:96 of K_DR. The
value of this register is saved in the CRYPTOCELL
AO power domain. */
__IOM uint32_t HOST_IOT_LCS; /*!< (@ 0x00001A60) Controls lifecycle state (LCS) for CRYPTOCELL
subsystem */
} NRF_CC_HOST_RGF_Type; /*!< Size = 6756 (0x1a64) */
/* =========================================================================================================================== */
/* ================ CRYPTOCELL_S ================ */
/* =========================================================================================================================== */
/**
* @brief ARM TrustZone CryptoCell register interface (CRYPTOCELL_S)
*/
typedef struct { /*!< (@ 0x50840000) CRYPTOCELL_S Structure */
__IM uint32_t RESERVED[320];
__IOM uint32_t ENABLE; /*!< (@ 0x00000500) Enable CRYPTOCELL subsystem */
} NRF_CRYPTOCELL_Type; /*!< Size = 1284 (0x504) */
/* =========================================================================================================================== */
/* ================ P0_NS ================ */
/* =========================================================================================================================== */
/**
* @brief GPIO Port 0 (P0_NS)
*/
typedef struct { /*!< (@ 0x40842500) P0_NS Structure */
__IM uint32_t RESERVED;
__IOM uint32_t OUT; /*!< (@ 0x00000004) Write GPIO port */
__IOM uint32_t OUTSET; /*!< (@ 0x00000008) Set individual bits in GPIO port */
__IOM uint32_t OUTCLR; /*!< (@ 0x0000000C) Clear individual bits in GPIO port */
__IM uint32_t IN; /*!< (@ 0x00000010) Read GPIO port */
__IOM uint32_t DIR; /*!< (@ 0x00000014) Direction of GPIO pins */
__IOM uint32_t DIRSET; /*!< (@ 0x00000018) DIR set register */
__IOM uint32_t DIRCLR; /*!< (@ 0x0000001C) DIR clear register */
__IOM uint32_t LATCH; /*!< (@ 0x00000020) Latch register indicating what GPIO pins that
have met the criteria set in the PIN_CNF[n].SENSE
registers */
__IOM uint32_t DETECTMODE; /*!< (@ 0x00000024) Select between default DETECT signal behavior
and LDETECT mode (For non-secure pin only) */
__IOM uint32_t DETECTMODE_SEC; /*!< (@ 0x00000028) Select between default DETECT signal behavior
and LDETECT mode (For secure pin only) */
__IM uint32_t RESERVED1[117];
__IOM uint32_t PIN_CNF[32]; /*!< (@ 0x00000200) Description collection: Configuration of GPIO
pins */
} NRF_GPIO_Type; /*!< Size = 640 (0x280) */
/** @} */ /* End of group Device_Peripheral_peripherals */
/* =========================================================================================================================== */
/* ================ Device Specific Peripheral Address Map ================ */
/* =========================================================================================================================== */
/** @addtogroup Device_Peripheral_peripheralAddr
* @{
*/
#define NRF_FICR_S_BASE 0x00FF0000UL
#define NRF_UICR_S_BASE 0x00FF8000UL
#define NRF_TAD_S_BASE 0xE0080000UL
#define NRF_SPU_S_BASE 0x50003000UL
#define NRF_REGULATORS_NS_BASE 0x40004000UL
#define NRF_REGULATORS_S_BASE 0x50004000UL
#define NRF_CLOCK_NS_BASE 0x40005000UL
#define NRF_POWER_NS_BASE 0x40005000UL
#define NRF_CLOCK_S_BASE 0x50005000UL
#define NRF_POWER_S_BASE 0x50005000UL
#define NRF_CTRL_AP_PERI_S_BASE 0x50006000UL
#define NRF_SPIM0_NS_BASE 0x40008000UL
#define NRF_SPIS0_NS_BASE 0x40008000UL
#define NRF_TWIM0_NS_BASE 0x40008000UL
#define NRF_TWIS0_NS_BASE 0x40008000UL
#define NRF_UARTE0_NS_BASE 0x40008000UL
#define NRF_SPIM0_S_BASE 0x50008000UL
#define NRF_SPIS0_S_BASE 0x50008000UL
#define NRF_TWIM0_S_BASE 0x50008000UL
#define NRF_TWIS0_S_BASE 0x50008000UL
#define NRF_UARTE0_S_BASE 0x50008000UL
#define NRF_SPIM1_NS_BASE 0x40009000UL
#define NRF_SPIS1_NS_BASE 0x40009000UL
#define NRF_TWIM1_NS_BASE 0x40009000UL
#define NRF_TWIS1_NS_BASE 0x40009000UL
#define NRF_UARTE1_NS_BASE 0x40009000UL
#define NRF_SPIM1_S_BASE 0x50009000UL
#define NRF_SPIS1_S_BASE 0x50009000UL
#define NRF_TWIM1_S_BASE 0x50009000UL
#define NRF_TWIS1_S_BASE 0x50009000UL
#define NRF_UARTE1_S_BASE 0x50009000UL
#define NRF_SPIM2_NS_BASE 0x4000A000UL
#define NRF_SPIS2_NS_BASE 0x4000A000UL
#define NRF_TWIM2_NS_BASE 0x4000A000UL
#define NRF_TWIS2_NS_BASE 0x4000A000UL
#define NRF_UARTE2_NS_BASE 0x4000A000UL
#define NRF_SPIM2_S_BASE 0x5000A000UL
#define NRF_SPIS2_S_BASE 0x5000A000UL
#define NRF_TWIM2_S_BASE 0x5000A000UL
#define NRF_TWIS2_S_BASE 0x5000A000UL
#define NRF_UARTE2_S_BASE 0x5000A000UL
#define NRF_SPIM3_NS_BASE 0x4000B000UL
#define NRF_SPIS3_NS_BASE 0x4000B000UL
#define NRF_TWIM3_NS_BASE 0x4000B000UL
#define NRF_TWIS3_NS_BASE 0x4000B000UL
#define NRF_UARTE3_NS_BASE 0x4000B000UL
#define NRF_SPIM3_S_BASE 0x5000B000UL
#define NRF_SPIS3_S_BASE 0x5000B000UL
#define NRF_TWIM3_S_BASE 0x5000B000UL
#define NRF_TWIS3_S_BASE 0x5000B000UL
#define NRF_UARTE3_S_BASE 0x5000B000UL
#define NRF_GPIOTE0_S_BASE 0x5000D000UL
#define NRF_SAADC_NS_BASE 0x4000E000UL
#define NRF_SAADC_S_BASE 0x5000E000UL
#define NRF_TIMER0_NS_BASE 0x4000F000UL
#define NRF_TIMER0_S_BASE 0x5000F000UL
#define NRF_TIMER1_NS_BASE 0x40010000UL
#define NRF_TIMER1_S_BASE 0x50010000UL
#define NRF_TIMER2_NS_BASE 0x40011000UL
#define NRF_TIMER2_S_BASE 0x50011000UL
#define NRF_RTC0_NS_BASE 0x40014000UL
#define NRF_RTC0_S_BASE 0x50014000UL
#define NRF_RTC1_NS_BASE 0x40015000UL
#define NRF_RTC1_S_BASE 0x50015000UL
#define NRF_DPPIC_NS_BASE 0x40017000UL
#define NRF_DPPIC_S_BASE 0x50017000UL
#define NRF_WDT_NS_BASE 0x40018000UL
#define NRF_WDT_S_BASE 0x50018000UL
#define NRF_EGU0_NS_BASE 0x4001B000UL
#define NRF_EGU0_S_BASE 0x5001B000UL
#define NRF_EGU1_NS_BASE 0x4001C000UL
#define NRF_EGU1_S_BASE 0x5001C000UL
#define NRF_EGU2_NS_BASE 0x4001D000UL
#define NRF_EGU2_S_BASE 0x5001D000UL
#define NRF_EGU3_NS_BASE 0x4001E000UL
#define NRF_EGU3_S_BASE 0x5001E000UL
#define NRF_EGU4_NS_BASE 0x4001F000UL
#define NRF_EGU4_S_BASE 0x5001F000UL
#define NRF_EGU5_NS_BASE 0x40020000UL
#define NRF_EGU5_S_BASE 0x50020000UL
#define NRF_PWM0_NS_BASE 0x40021000UL
#define NRF_PWM0_S_BASE 0x50021000UL
#define NRF_PWM1_NS_BASE 0x40022000UL
#define NRF_PWM1_S_BASE 0x50022000UL
#define NRF_PWM2_NS_BASE 0x40023000UL
#define NRF_PWM2_S_BASE 0x50023000UL
#define NRF_PWM3_NS_BASE 0x40024000UL
#define NRF_PWM3_S_BASE 0x50024000UL
#define NRF_PDM_NS_BASE 0x40026000UL
#define NRF_PDM_S_BASE 0x50026000UL
#define NRF_I2S_NS_BASE 0x40028000UL
#define NRF_I2S_S_BASE 0x50028000UL
#define NRF_IPC_NS_BASE 0x4002A000UL
#define NRF_IPC_S_BASE 0x5002A000UL
#define NRF_FPU_NS_BASE 0x4002C000UL
#define NRF_FPU_S_BASE 0x5002C000UL
#define NRF_GPIOTE1_NS_BASE 0x40031000UL
#define NRF_KMU_NS_BASE 0x40039000UL
#define NRF_NVMC_NS_BASE 0x40039000UL
#define NRF_KMU_S_BASE 0x50039000UL
#define NRF_NVMC_S_BASE 0x50039000UL
#define NRF_VMC_NS_BASE 0x4003A000UL
#define NRF_VMC_S_BASE 0x5003A000UL
#define NRF_CC_HOST_RGF_S_BASE 0x50840000UL
#define NRF_CRYPTOCELL_S_BASE 0x50840000UL
#define NRF_P0_NS_BASE 0x40842500UL
#define NRF_P0_S_BASE 0x50842500UL
/** @} */ /* End of group Device_Peripheral_peripheralAddr */
/* =========================================================================================================================== */
/* ================ Peripheral declaration ================ */
/* =========================================================================================================================== */
/** @addtogroup Device_Peripheral_declaration
* @{
*/
#define NRF_FICR_S ((NRF_FICR_Type*) NRF_FICR_S_BASE)
#define NRF_UICR_S ((NRF_UICR_Type*) NRF_UICR_S_BASE)
#define NRF_TAD_S ((NRF_TAD_Type*) NRF_TAD_S_BASE)
#define NRF_SPU_S ((NRF_SPU_Type*) NRF_SPU_S_BASE)
#define NRF_REGULATORS_NS ((NRF_REGULATORS_Type*) NRF_REGULATORS_NS_BASE)
#define NRF_REGULATORS_S ((NRF_REGULATORS_Type*) NRF_REGULATORS_S_BASE)
#define NRF_CLOCK_NS ((NRF_CLOCK_Type*) NRF_CLOCK_NS_BASE)
#define NRF_POWER_NS ((NRF_POWER_Type*) NRF_POWER_NS_BASE)
#define NRF_CLOCK_S ((NRF_CLOCK_Type*) NRF_CLOCK_S_BASE)
#define NRF_POWER_S ((NRF_POWER_Type*) NRF_POWER_S_BASE)
#define NRF_CTRL_AP_PERI_S ((NRF_CTRLAPPERI_Type*) NRF_CTRL_AP_PERI_S_BASE)
#define NRF_SPIM0_NS ((NRF_SPIM_Type*) NRF_SPIM0_NS_BASE)
#define NRF_SPIS0_NS ((NRF_SPIS_Type*) NRF_SPIS0_NS_BASE)
#define NRF_TWIM0_NS ((NRF_TWIM_Type*) NRF_TWIM0_NS_BASE)
#define NRF_TWIS0_NS ((NRF_TWIS_Type*) NRF_TWIS0_NS_BASE)
#define NRF_UARTE0_NS ((NRF_UARTE_Type*) NRF_UARTE0_NS_BASE)
#define NRF_SPIM0_S ((NRF_SPIM_Type*) NRF_SPIM0_S_BASE)
#define NRF_SPIS0_S ((NRF_SPIS_Type*) NRF_SPIS0_S_BASE)
#define NRF_TWIM0_S ((NRF_TWIM_Type*) NRF_TWIM0_S_BASE)
#define NRF_TWIS0_S ((NRF_TWIS_Type*) NRF_TWIS0_S_BASE)
#define NRF_UARTE0_S ((NRF_UARTE_Type*) NRF_UARTE0_S_BASE)
#define NRF_SPIM1_NS ((NRF_SPIM_Type*) NRF_SPIM1_NS_BASE)
#define NRF_SPIS1_NS ((NRF_SPIS_Type*) NRF_SPIS1_NS_BASE)
#define NRF_TWIM1_NS ((NRF_TWIM_Type*) NRF_TWIM1_NS_BASE)
#define NRF_TWIS1_NS ((NRF_TWIS_Type*) NRF_TWIS1_NS_BASE)
#define NRF_UARTE1_NS ((NRF_UARTE_Type*) NRF_UARTE1_NS_BASE)
#define NRF_SPIM1_S ((NRF_SPIM_Type*) NRF_SPIM1_S_BASE)
#define NRF_SPIS1_S ((NRF_SPIS_Type*) NRF_SPIS1_S_BASE)
#define NRF_TWIM1_S ((NRF_TWIM_Type*) NRF_TWIM1_S_BASE)
#define NRF_TWIS1_S ((NRF_TWIS_Type*) NRF_TWIS1_S_BASE)
#define NRF_UARTE1_S ((NRF_UARTE_Type*) NRF_UARTE1_S_BASE)
#define NRF_SPIM2_NS ((NRF_SPIM_Type*) NRF_SPIM2_NS_BASE)
#define NRF_SPIS2_NS ((NRF_SPIS_Type*) NRF_SPIS2_NS_BASE)
#define NRF_TWIM2_NS ((NRF_TWIM_Type*) NRF_TWIM2_NS_BASE)
#define NRF_TWIS2_NS ((NRF_TWIS_Type*) NRF_TWIS2_NS_BASE)
#define NRF_UARTE2_NS ((NRF_UARTE_Type*) NRF_UARTE2_NS_BASE)
#define NRF_SPIM2_S ((NRF_SPIM_Type*) NRF_SPIM2_S_BASE)
#define NRF_SPIS2_S ((NRF_SPIS_Type*) NRF_SPIS2_S_BASE)
#define NRF_TWIM2_S ((NRF_TWIM_Type*) NRF_TWIM2_S_BASE)
#define NRF_TWIS2_S ((NRF_TWIS_Type*) NRF_TWIS2_S_BASE)
#define NRF_UARTE2_S ((NRF_UARTE_Type*) NRF_UARTE2_S_BASE)
#define NRF_SPIM3_NS ((NRF_SPIM_Type*) NRF_SPIM3_NS_BASE)
#define NRF_SPIS3_NS ((NRF_SPIS_Type*) NRF_SPIS3_NS_BASE)
#define NRF_TWIM3_NS ((NRF_TWIM_Type*) NRF_TWIM3_NS_BASE)
#define NRF_TWIS3_NS ((NRF_TWIS_Type*) NRF_TWIS3_NS_BASE)
#define NRF_UARTE3_NS ((NRF_UARTE_Type*) NRF_UARTE3_NS_BASE)
#define NRF_SPIM3_S ((NRF_SPIM_Type*) NRF_SPIM3_S_BASE)
#define NRF_SPIS3_S ((NRF_SPIS_Type*) NRF_SPIS3_S_BASE)
#define NRF_TWIM3_S ((NRF_TWIM_Type*) NRF_TWIM3_S_BASE)
#define NRF_TWIS3_S ((NRF_TWIS_Type*) NRF_TWIS3_S_BASE)
#define NRF_UARTE3_S ((NRF_UARTE_Type*) NRF_UARTE3_S_BASE)
#define NRF_GPIOTE0_S ((NRF_GPIOTE_Type*) NRF_GPIOTE0_S_BASE)
#define NRF_SAADC_NS ((NRF_SAADC_Type*) NRF_SAADC_NS_BASE)
#define NRF_SAADC_S ((NRF_SAADC_Type*) NRF_SAADC_S_BASE)
#define NRF_TIMER0_NS ((NRF_TIMER_Type*) NRF_TIMER0_NS_BASE)
#define NRF_TIMER0_S ((NRF_TIMER_Type*) NRF_TIMER0_S_BASE)
#define NRF_TIMER1_NS ((NRF_TIMER_Type*) NRF_TIMER1_NS_BASE)
#define NRF_TIMER1_S ((NRF_TIMER_Type*) NRF_TIMER1_S_BASE)
#define NRF_TIMER2_NS ((NRF_TIMER_Type*) NRF_TIMER2_NS_BASE)
#define NRF_TIMER2_S ((NRF_TIMER_Type*) NRF_TIMER2_S_BASE)
#define NRF_RTC0_NS ((NRF_RTC_Type*) NRF_RTC0_NS_BASE)
#define NRF_RTC0_S ((NRF_RTC_Type*) NRF_RTC0_S_BASE)
#define NRF_RTC1_NS ((NRF_RTC_Type*) NRF_RTC1_NS_BASE)
#define NRF_RTC1_S ((NRF_RTC_Type*) NRF_RTC1_S_BASE)
#define NRF_DPPIC_NS ((NRF_DPPIC_Type*) NRF_DPPIC_NS_BASE)
#define NRF_DPPIC_S ((NRF_DPPIC_Type*) NRF_DPPIC_S_BASE)
#define NRF_WDT_NS ((NRF_WDT_Type*) NRF_WDT_NS_BASE)
#define NRF_WDT_S ((NRF_WDT_Type*) NRF_WDT_S_BASE)
#define NRF_EGU0_NS ((NRF_EGU_Type*) NRF_EGU0_NS_BASE)
#define NRF_EGU0_S ((NRF_EGU_Type*) NRF_EGU0_S_BASE)
#define NRF_EGU1_NS ((NRF_EGU_Type*) NRF_EGU1_NS_BASE)
#define NRF_EGU1_S ((NRF_EGU_Type*) NRF_EGU1_S_BASE)
#define NRF_EGU2_NS ((NRF_EGU_Type*) NRF_EGU2_NS_BASE)
#define NRF_EGU2_S ((NRF_EGU_Type*) NRF_EGU2_S_BASE)
#define NRF_EGU3_NS ((NRF_EGU_Type*) NRF_EGU3_NS_BASE)
#define NRF_EGU3_S ((NRF_EGU_Type*) NRF_EGU3_S_BASE)
#define NRF_EGU4_NS ((NRF_EGU_Type*) NRF_EGU4_NS_BASE)
#define NRF_EGU4_S ((NRF_EGU_Type*) NRF_EGU4_S_BASE)
#define NRF_EGU5_NS ((NRF_EGU_Type*) NRF_EGU5_NS_BASE)
#define NRF_EGU5_S ((NRF_EGU_Type*) NRF_EGU5_S_BASE)
#define NRF_PWM0_NS ((NRF_PWM_Type*) NRF_PWM0_NS_BASE)
#define NRF_PWM0_S ((NRF_PWM_Type*) NRF_PWM0_S_BASE)
#define NRF_PWM1_NS ((NRF_PWM_Type*) NRF_PWM1_NS_BASE)
#define NRF_PWM1_S ((NRF_PWM_Type*) NRF_PWM1_S_BASE)
#define NRF_PWM2_NS ((NRF_PWM_Type*) NRF_PWM2_NS_BASE)
#define NRF_PWM2_S ((NRF_PWM_Type*) NRF_PWM2_S_BASE)
#define NRF_PWM3_NS ((NRF_PWM_Type*) NRF_PWM3_NS_BASE)
#define NRF_PWM3_S ((NRF_PWM_Type*) NRF_PWM3_S_BASE)
#define NRF_PDM_NS ((NRF_PDM_Type*) NRF_PDM_NS_BASE)
#define NRF_PDM_S ((NRF_PDM_Type*) NRF_PDM_S_BASE)
#define NRF_I2S_NS ((NRF_I2S_Type*) NRF_I2S_NS_BASE)
#define NRF_I2S_S ((NRF_I2S_Type*) NRF_I2S_S_BASE)
#define NRF_IPC_NS ((NRF_IPC_Type*) NRF_IPC_NS_BASE)
#define NRF_IPC_S ((NRF_IPC_Type*) NRF_IPC_S_BASE)
#define NRF_FPU_NS ((NRF_FPU_Type*) NRF_FPU_NS_BASE)
#define NRF_FPU_S ((NRF_FPU_Type*) NRF_FPU_S_BASE)
#define NRF_GPIOTE1_NS ((NRF_GPIOTE_Type*) NRF_GPIOTE1_NS_BASE)
#define NRF_KMU_NS ((NRF_KMU_Type*) NRF_KMU_NS_BASE)
#define NRF_NVMC_NS ((NRF_NVMC_Type*) NRF_NVMC_NS_BASE)
#define NRF_KMU_S ((NRF_KMU_Type*) NRF_KMU_S_BASE)
#define NRF_NVMC_S ((NRF_NVMC_Type*) NRF_NVMC_S_BASE)
#define NRF_VMC_NS ((NRF_VMC_Type*) NRF_VMC_NS_BASE)
#define NRF_VMC_S ((NRF_VMC_Type*) NRF_VMC_S_BASE)
#define NRF_CC_HOST_RGF_S ((NRF_CC_HOST_RGF_Type*) NRF_CC_HOST_RGF_S_BASE)
#define NRF_CRYPTOCELL_S ((NRF_CRYPTOCELL_Type*) NRF_CRYPTOCELL_S_BASE)
#define NRF_P0_NS ((NRF_GPIO_Type*) NRF_P0_NS_BASE)
#define NRF_P0_S ((NRF_GPIO_Type*) NRF_P0_S_BASE)
/** @} */ /* End of group Device_Peripheral_declaration */
#ifdef __cplusplus
}
#endif
#endif /* NRF9160_H */
/** @} */ /* End of group nrf9160 */
/** @} */ /* End of group Nordic Semiconductor */