Generate v2 Gerbers

fw/nrf52/main.c

@@ -8,13 +8,15 @@
 #include "nrf_fprintf.h"
 
 // LED definitions
-#define LED_PIN         7
+#define REG_EN_PIN         15
-#define LED_BIT         (1 << LED_PIN)
+#define REG_EN_BIT         (1 << REG_EN_PIN)
+#define PWR_EN_PIN         12
+#define PWR_EN_BIT         (1 << PWR_EN_PIN)
 
 // UART definitions
 #define UART_PIN_DISCONNECTED   0xFFFFFFFF
-#define UART_TX_PIN             15
+#define UART_TX_PIN             18
-#define UART_RX_PIN             14
+#define UART_RX_PIN             20
 #define UART_RTS_PIN            UART_PIN_DISCONNECTED
 #define UART_CTS_PIN            UART_PIN_DISCONNECTED
 #define UART_BAUD               NRF_UART_BAUDRATE_115200
@@ -50,124 +52,107 @@ nrfx_uart_t nrfx_uart =
     NRF_UART0, 0
 };
 
-int main(void)
+int main(void) {
-{
+  uint32_t tix;
-    uint32_t tix;
 
-    mstimeout(&tix, 0);
+  mstimeout(&tix, 0);
-    init_gpio();
+  init_gpio();
-    init_serial();
+  init_serial();
-    printf("\nNRF52 test\n");
+  printf("\nNRF52 test\n");
-    while (1)
+  NRF_GPIO->OUT |= PWR_EN_BIT;
-    {
+  while (1) {
-        if (mstimeout(&tix, 500))
+    if (mstimeout(&tix, 500)) {
-        {
+      NRF_GPIO->OUT ^= REG_EN_BIT;
-            NRF_GPIO->OUT ^= LED_BIT;
+      putch('.');
-            putch('.');
-        }
-        poll_serial();
     }
+    poll_serial();
+  }
 }
 
 // Initialise I/O port, and system tick counter
-void init_gpio(void)
+void init_gpio(void) {
-{
+  nrf_gpio_cfg_output(REG_EN_PIN);
-    nrf_gpio_cfg_output(LED_PIN);
+  nrf_gpio_cfg_output(PWR_EN_PIN);
-    nrf_drv_systick_init();
+  nrf_drv_systick_init();
 }
 
 // Check for timeout in milliseconds
-int mstimeout(uint32_t *tickp, uint32_t msec)
+int mstimeout(uint32_t *tickp, uint32_t msec) {
-{
+  uint32_t t, diff;
-    uint32_t t, diff;
 
-    t = nrf_systick_val_get();
+  t = nrf_systick_val_get();
-    diff = NRF_SYSTICK_VAL_MASK & (systicks - t);
+  diff = NRF_SYSTICK_VAL_MASK & (systicks - t);
 
-    if (msec == 0)
+  if (msec == 0) {
-    {
+    systicks = t;
-        systicks = t;
+    *tickp = msticks;
-        *tickp = msticks;
+  } else if ((diff /= SystemCoreClock/1000) > 0) {
+    systicks = t;
+    msticks += diff;
+    diff = msticks - *tickp;
+    if (diff >= msec) {
+      *tickp = msticks;
+      return(1);
     }
-    else if ((diff /= SystemCoreClock/1000) > 0)
+  }
-    {
+  return(0);
-        systicks = t;
-        msticks += diff;
-        diff = msticks - *tickp;
-        if (diff >= msec)
-        {
-            *tickp = msticks;
-            return(1);
-        }
-    }
-    return(0);
 }
 
 // Formatted print to serial port
-int printf(const char *fmt, ...)
+int printf(const char *fmt, ...) {
-{
+  va_list args;
-    va_list args;
+  int n;
-    int n;
 
-    va_start(args, fmt);
+  va_start(args, fmt);
-    nrf_fprintf(&fprintf_ctx, fmt, &args);
+  nrf_fprintf(&fprintf_ctx, fmt, &args);
-    n = fprintf_ctx.io_buffer_cnt;
+  n = fprintf_ctx.io_buffer_cnt;
-    nrf_fprintf_buffer_flush(&fprintf_ctx);
+  nrf_fprintf_buffer_flush(&fprintf_ctx);
-    va_end(args);
+  va_end(args);
-    return(n);
+  return(n);
 }
 
 // Initialise serial I/O
-void init_serial(void)
+void init_serial(void) {
-{
+  const nrfx_uart_config_t config = {
-    const nrfx_uart_config_t config = {
+      UART_TX_PIN, UART_RX_PIN,
-        UART_TX_PIN, UART_RX_PIN,
+      UART_CTS_PIN, UART_RTS_PIN, 0, 
-        UART_CTS_PIN, UART_RTS_PIN, 0, 
+      NRF_UART_HWFC_DISABLED, 0, UART_BAUD, 
-        NRF_UART_HWFC_DISABLED, 0, UART_BAUD, 
+      APP_IRQ_PRIORITY_LOWEST};
-        APP_IRQ_PRIORITY_LOWEST};
+  nrfx_uart_init(&nrfx_uart, &config, 0);
-    nrfx_uart_init(&nrfx_uart, &config, 0);
 }
 
 // Poll serial interface, send next Tx char
-void poll_serial(void)
+void poll_serial(void) {
-{
+  uint8_t b;
-    uint8_t b;
 
-    if (ser_txin!=ser_txout && !nrfx_uart_tx_in_progress(&nrfx_uart))
+  if (ser_txin!=ser_txout && !nrfx_uart_tx_in_progress(&nrfx_uart)) {
-    {
+    b = ser_txbuff[ser_txout++];
-        b = ser_txbuff[ser_txout++];
+    if (ser_txout >= SER_TX_BUFFLEN)
-        if (ser_txout >= SER_TX_BUFFLEN)
+        ser_txout = 0;
-            ser_txout = 0;
+    nrfx_uart_tx(&nrfx_uart, &b, 1);
-        nrfx_uart_tx(&nrfx_uart, &b, 1);
+  }
-    }
 }
 
 // Add character to serial Tx circular buffer
 // Discard character if buffer is full
-int putch(int c)
+int putch(int c) {
-{
+  int in=ser_txin+1;
-    int in=ser_txin+1;
 
-    if (in >= SER_TX_BUFFLEN)
+  if (in >= SER_TX_BUFFLEN)
-        in = 0;
+    in = 0;
-    if (in != ser_txout)
+  if (in != ser_txout) {
-    {
+    ser_txbuff[ser_txin] = (uint8_t)c;
-        ser_txbuff[ser_txin] = (uint8_t)c;
+    ser_txin = in;
-        ser_txin = in;
+  }
-    }
+  return(c);
-    return(c);
 }
 
 // Send data block to UART (via circular buffer)
-void uart_tx(void const *ctxp, char const *buff, size_t len)
+void uart_tx(void const *ctxp, char const *buff, size_t len) {
-{
+  while (len--)
-    while (len--)
+    putch(*buff++);
-        putch(*buff++);
 }
 
 // Dummy UART event handler
-void uart_event_handler(nrfx_uart_event_t const * evtp, void *ctxp)
+void uart_event_handler(nrfx_uart_event_t const * evtp, void *ctxp) {
-{
 }
-
-// EOF

pcb/ball-spider/ball-spider-cache.lib

@@ -101,45 +101,6 @@ X Pin_9 9 -200 -200 150 R 50 50 1 1 P
 ENDDRAW
 ENDDEF
 #
-# Connector_Generic_Conn_02x06_Odd_Even
-#
-DEF Connector_Generic_Conn_02x06_Odd_Even J 0 40 Y N 1 F N
-F0 "J" 50 300 50 H V C CNN
-F1 "Connector_Generic_Conn_02x06_Odd_Even" 50 -400 50 H V C CNN
-F2 "" 0 0 50 H I C CNN
-F3 "" 0 0 50 H I C CNN
-$FPLIST
- Connector*:*_2x??_*
-$ENDFPLIST
-DRAW
-S -50 -295 0 -305 1 1 6 N
-S -50 -195 0 -205 1 1 6 N
-S -50 -95 0 -105 1 1 6 N
-S -50 5 0 -5 1 1 6 N
-S -50 105 0 95 1 1 6 N
-S -50 205 0 195 1 1 6 N
-S -50 250 150 -350 1 1 10 f
-S 150 -295 100 -305 1 1 6 N
-S 150 -195 100 -205 1 1 6 N
-S 150 -95 100 -105 1 1 6 N
-S 150 5 100 -5 1 1 6 N
-S 150 105 100 95 1 1 6 N
-S 150 205 100 195 1 1 6 N
-X Pin_1 1 -200 200 150 R 50 50 1 1 P
-X Pin_10 10 300 -200 150 L 50 50 1 1 P
-X Pin_11 11 -200 -300 150 R 50 50 1 1 P
-X Pin_12 12 300 -300 150 L 50 50 1 1 P
-X Pin_2 2 300 200 150 L 50 50 1 1 P
-X Pin_3 3 -200 100 150 R 50 50 1 1 P
-X Pin_4 4 300 100 150 L 50 50 1 1 P
-X Pin_5 5 -200 0 150 R 50 50 1 1 P
-X Pin_6 6 300 0 150 L 50 50 1 1 P
-X Pin_7 7 -200 -100 150 R 50 50 1 1 P
-X Pin_8 8 300 -100 150 L 50 50 1 1 P
-X Pin_9 9 -200 -200 150 R 50 50 1 1 P
-ENDDRAW
-ENDDEF
-#
 # Connector_TestPoint
 #
 DEF Connector_TestPoint TP 0 30 N N 1 F N
@@ -198,28 +159,28 @@ X 4 4 0 100 25 D 30 50 1 1 P
 ENDDRAW
 ENDDEF
 #
-# Device_D_Schottky_x2_ACom_KKA
+# Device_D_Schottky_x2_KCom_AAK
 #
-DEF Device_D_Schottky_x2_ACom_KKA D 0 30 Y N 1 F N
+DEF Device_D_Schottky_x2_KCom_AAK D 0 30 Y N 1 F N
 F0 "D" 50 -100 50 H V C CNN
-F1 "Device_D_Schottky_x2_ACom_KKA" 0 100 50 H V C CNN
+F1 "Device_D_Schottky_x2_KCom_AAK" 0 100 50 H V C CNN
 F2 "" 0 0 50 H I C CNN
 F3 "" 0 0 50 H I C CNN
 DRAW
 C 0 0 10 0 1 0 F
-P 2 0 1 0 -140 0 150 0 N
+P 2 0 1 0 -150 0 150 0 N
 P 2 0 1 0 0 0 0 -100 N
-P 3 0 1 8 -150 50 -150 -50 -150 -50 N
+P 3 0 1 10 -50 -50 -50 50 -50 50 N
-P 3 0 1 8 150 50 150 -50 150 -50 N
+P 3 0 1 10 50 -50 50 50 50 50 N
-P 4 0 1 8 -150 50 -170 50 -170 40 -170 40 N
+P 4 0 1 10 -50 -50 -30 -50 -30 -40 -30 -40 N
-P 4 0 1 8 150 -50 170 -50 170 -40 170 -40 N
+P 4 0 1 10 50 -50 70 -50 70 -40 70 -40 N
-P 4 0 1 8 150 50 130 50 130 40 130 40 N
+P 4 0 1 10 50 50 30 50 30 40 30 40 N
-P 5 0 1 8 -130 -40 -130 -50 -150 -50 -150 -50 -150 -50 N
+P 5 0 1 10 -70 40 -70 50 -50 50 -50 50 -50 50 N
-P 6 0 1 8 -50 -50 -150 0 -50 50 -50 -50 -50 -50 -50 -50 N
+P 6 0 1 10 -150 50 -50 0 -150 -50 -150 50 -150 50 -150 50 N
-P 6 0 1 8 50 50 150 0 50 -50 50 50 50 50 50 50 N
+P 6 0 1 10 150 -50 50 0 150 50 150 -50 150 -50 150 -50 N
-X K 1 -300 0 150 R 50 50 0 1 P
+X A 1 -300 0 150 R 50 50 0 1 P
-X K 2 300 0 150 L 50 50 0 1 P
+X A 2 300 0 150 L 50 50 0 1 P
-X A 3 0 -200 100 U 50 50 0 1 P
+X K 3 0 -200 100 U 50 50 0 1 P
 ENDDRAW
 ENDDEF
 #
@@ -236,9 +197,9 @@ $FPLIST
  LED_THT:*
 $ENDFPLIST
 DRAW
-P 2 0 1 0 -30 -40 -30 40 N
+P 2 0 1 10 -30 -40 -30 40 N
 P 2 0 1 0 40 0 -30 0 N
-P 4 0 1 0 30 -40 -30 0 30 40 30 -40 N
+P 4 0 1 10 30 -40 -30 0 30 40 30 -40 N
 P 5 0 1 0 0 30 -20 50 -10 50 -20 50 -20 40 N
 P 5 0 1 0 20 50 0 70 10 70 0 70 0 60 N
 X K 1 -100 0 70 R 50 50 1 1 P
@@ -342,52 +303,39 @@ X ~ 2 0 -100 30 U 50 50 1 1 P
 ENDDRAW
 ENDDEF
 #
-# MCU_Microchip_ATmega_ATmega328P-MU
+# Logic_LevelTranslator_FXMA108
 #
-DEF MCU_Microchip_ATmega_ATmega328P-MU U 0 20 Y Y 1 F N
+DEF Logic_LevelTranslator_FXMA108 U 0 20 Y Y 1 F N
-F0 "U" -500 1450 50 H V L BNN
+F0 "U" -250 550 50 H V C CNN
-F1 "MCU_Microchip_ATmega_ATmega328P-MU" 100 -1450 50 H V L TNN
+F1 "Logic_LevelTranslator_FXMA108" 300 550 50 H V C CNN
-F2 "Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm" 0 0 50 H I C CIN
+F2 "Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm" 0 -700 50 H I C CNN
-F3 "" 0 0 50 H I C CNN
+F3 "" 0 50 50 H I C CNN
-ALIAS ATmega48P-20MU ATmega48A-MU ATmega48PA-MU ATmega88PV-10MU ATmega88P-20MU ATmega88A-MU ATmega88PA-MU ATmega168PV-10MU ATmega168P-20MU ATmega168A-MU ATmega168PA-MU ATmega328-MU ATmega328P-MU
 $FPLIST
- QFN*1EP*5x5mm*P0.5mm*
+ WQFN*2.5x4.5mm*P0.5mm*EP1x2.9mm*
 $ENDFPLIST
 DRAW
-S -500 -1400 500 1400 0 1 10 f
+S -300 500 300 -500 1 1 10 f
-X PD3 1 600 -800 100 L 50 50 1 1 B
+X VCCA 1 -100 600 100 D 50 50 1 1 W
-X PD6 10 600 -1100 100 L 50 50 1 1 B
+X GND 10 0 -600 100 U 50 50 1 1 W
-X PD7 11 600 -1200 100 L 50 50 1 1 B
+X ~OE 11 -400 400 100 R 50 50 1 1 I
-X PB0 12 600 1200 100 L 50 50 1 1 B
+X B7 12 400 -400 100 L 50 50 1 1 B
-X PB1 13 600 1100 100 L 50 50 1 1 B
+X B6 13 400 -300 100 L 50 50 1 1 B
-X PB2 14 600 1000 100 L 50 50 1 1 B
+X B5 14 400 -200 100 L 50 50 1 1 B
-X PB3 15 600 900 100 L 50 50 1 1 B
+X B4 15 400 -100 100 L 50 50 1 1 B
-X PB4 16 600 800 100 L 50 50 1 1 B
+X B3 16 400 0 100 L 50 50 1 1 B
-X PB5 17 600 700 100 L 50 50 1 1 B
+X B2 17 400 100 100 L 50 50 1 1 B
-X AVCC 18 100 1500 100 D 50 50 1 1 W
+X B1 18 400 200 100 L 50 50 1 1 B
-X ADC6 19 -600 1000 100 R 50 50 1 1 I
+X B0 19 400 300 100 L 50 50 1 1 B
-X PD4 2 600 -900 100 L 50 50 1 1 B
+X A0 2 -400 300 100 R 50 50 1 1 B
-X AREF 20 -600 1200 100 R 50 50 1 1 P
+X VCCB 20 100 600 100 D 50 50 1 1 W
-X GND 21 0 -1500 100 U 50 50 1 1 P N
+X NC 21 100 -500 100 U 50 50 1 1 N N
-X ADC7 22 -600 900 100 R 50 50 1 1 I
+X A1 3 -400 200 100 R 50 50 1 1 B
-X PC0 23 600 300 100 L 50 50 1 1 B
+X A2 4 -400 100 100 R 50 50 1 1 B
-X PC1 24 600 200 100 L 50 50 1 1 B
+X A3 5 -400 0 100 R 50 50 1 1 B
-X PC2 25 600 100 100 L 50 50 1 1 B
+X A4 6 -400 -100 100 R 50 50 1 1 B
-X PC3 26 600 0 100 L 50 50 1 1 B
+X A5 7 -400 -200 100 R 50 50 1 1 B
-X PC4 27 600 -100 100 L 50 50 1 1 B
+X A6 8 -400 -300 100 R 50 50 1 1 B
-X PC5 28 600 -200 100 L 50 50 1 1 B
+X A7 9 -400 -400 100 R 50 50 1 1 B
-X ~RESET~/PC6 29 600 -300 100 L 50 50 1 1 B
-X GND 3 0 -1500 100 U 50 50 1 1 W
-X PD0 30 600 -500 100 L 50 50 1 1 B
-X PD1 31 600 -600 100 L 50 50 1 1 B
-X PD2 32 600 -700 100 L 50 50 1 1 B
-X GND 33 0 -1500 100 U 50 50 1 1 P N
-X VCC 4 0 1500 100 D 50 50 1 1 W
-X GND 5 0 -1500 100 U 50 50 1 1 P N
-X VCC 6 0 1500 100 D 50 50 1 1 P N
-X XTAL1/PB6 7 600 600 100 L 50 50 1 1 B
-X XTAL2/PB7 8 600 500 100 L 50 50 1 1 B
-X PD5 9 600 -1000 100 L 50 50 1 1 B
 ENDDRAW
 ENDDEF
 #
@@ -439,6 +387,21 @@ X VDD 9 0 1000 100 D 50 50 1 1 W
 ENDDRAW
 ENDDEF
 #
+# Mechanical_MountingHole
+#
+DEF Mechanical_MountingHole H 0 40 Y Y 1 F N
+F0 "H" 0 200 50 H V C CNN
+F1 "Mechanical_MountingHole" 0 125 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ MountingHole*
+$ENDFPLIST
+DRAW
+C 0 0 50 0 1 50 N
+ENDDRAW
+ENDDEF
+#
 # Regulator_Linear_MIC5205-3.3YM5
 #
 DEF Regulator_Linear_MIC5205-3.3YM5 U 0 10 Y Y 1 F N
@@ -593,33 +556,4 @@ X pwr 1 0 0 0 U 50 50 0 0 w
 ENDDRAW
 ENDDEF
 #
-# spider-parts_74AXP4T245PWJ
-#
-DEF spider-parts_74AXP4T245PWJ U 0 40 Y Y 1 F N
-F0 "U" 0 0 50 H V C CNN
-F1 "spider-parts_74AXP4T245PWJ" 0 -1000 50 H V C CNN
-F2 "Package_SO:SSOP-16_4.4x5.2mm_P0.65mm" 0 0 50 H I C CNN
-F3 "" 0 0 50 H I C CNN
-F4 "771-74AXP4T245PWJ" 0 0 50 H I C CNN "Mouser"
-DRAW
-S -300 -50 300 -950 0 1 0 f
-X VCCA 1 -400 -150 100 R 50 50 1 1 W
-X 2B2 10 400 -750 100 L 50 50 1 1 B
-X 2B1 11 400 -650 100 L 50 50 1 1 B
-X 1B2 12 400 -550 100 L 50 50 1 1 B
-X 1B1 13 400 -450 100 L 50 50 1 1 B
-X 2~OE 14 400 -350 100 L 50 50 1 1 I
-X 1~OE 15 400 -250 100 L 50 50 1 1 I
-X VCCB 16 400 -150 100 L 50 50 1 1 W
-X 1DIR 2 -400 -250 100 R 50 50 1 1 I
-X 2DIR 3 -400 -350 100 R 50 50 1 1 I
-X 1A1 4 -400 -450 100 R 50 50 1 1 B
-X 1A2 5 -400 -550 100 R 50 50 1 1 B
-X 2A1 6 -400 -650 100 R 50 50 1 1 B
-X 2A2 7 -400 -750 100 R 50 50 1 1 B
-X GND 8 -400 -850 100 R 50 50 1 1 P
-X GND 9 400 -850 100 L 50 50 1 1 P
-ENDDRAW
-ENDDEF
-#
 #End Library

pcb/ball-spider/ball-spider.pro

@@ -1,4 +1,4 @@
-update=Sun 12 Apr 2020 01:46:53 PM EDT
+update=Tue 18 Aug 2020 08:36:36 AM EDT
 version=1
 last_client=kicad
 [cvpcb]
@@ -24,7 +24,7 @@ version=1
 version=1
 PageLayoutDescrFile=
 LastNetListRead=
-CopperLayerCount=4
+CopperLayerCount=2
 BoardThickness=1.6
 AllowMicroVias=0
 AllowBlindVias=0
@@ -38,11 +38,11 @@ MinMicroViaDrill=0
 MinHoleToHole=0.25
 TrackWidth1=0.1524
 TrackWidth2=0.1524
-TrackWidth3=0.254
+TrackWidth3=0.25
-TrackWidth4=0.3302
+TrackWidth4=0.3
-TrackWidth5=0.508
+TrackWidth5=0.5
-TrackWidth6=0.762
+TrackWidth6=0.75
-TrackWidth7=1.27
+TrackWidth7=1.25
 ViaDiameter1=0.6858
 ViaDrill1=0.3302
 ViaDiameter2=0.6858
@@ -85,11 +85,11 @@ Enabled=1
 [pcbnew/Layer.In1.Cu]
 Name=In1.Cu
 Type=0
-Enabled=1
+Enabled=0
 [pcbnew/Layer.In2.Cu]
 Name=In2.Cu
 Type=0
-Enabled=1
+Enabled=0
 [pcbnew/Layer.In3.Cu]
 Name=In3.Cu
 Type=0

pcb/ball-spider/spider-gerbers/ball-spider-Edge_Cuts.gm1

@@ -1,63 +1,41 @@
-G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.5*
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.6*
-G04 #@! TF.CreationDate,2020-04-28T07:55:39-04:00*
+G04 #@! TF.CreationDate,2020-08-22T22:17:50-04:00*
 G04 #@! TF.ProjectId,ball-spider,62616c6c-2d73-4706-9964-65722e6b6963,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.5) date 2020-04-28 07:55:39*
+G04 Created by KiCad (PCBNEW 5.1.6) date 2020-08-22 22:17:50*
 %MOMM*%
 %LPD*%
+G01*
 G04 APERTURE LIST*
+G04 #@! TA.AperFunction,Profile*
 %ADD10C,0.152400*%
+G04 #@! TD*
 G04 APERTURE END LIST*
 D10*
-X67400000Y-58800000D02*
+X81000000Y-132000000D02*
-X58800000Y-67400000D01*
+G75*
-X83700000Y-75100000D02*
+G02*
-X67400000Y-58800000D01*
+X77000000Y-136000000I-4000000J0D01*
-X75100000Y-83700000D02*
+G01*
-X83700000Y-75100000D01*
+X77000000Y-86000000D02*
-X58800000Y-67400000D02*
+G75*
-X75100000Y-83700000D01*
+G02*
-X16300000Y-75100000D02*
+X81000000Y-90000000I0J-4000000D01*
-X32600000Y-58800000D01*
+G01*
-X24900000Y-83700000D02*
+X31000000Y-90000000D02*
-X16300000Y-75100000D01*
+G75*
-X41200000Y-67400000D02*
+G02*
-X24900000Y-83700000D01*
+X35000000Y-86000000I4000000J0D01*
-X32600000Y-58800000D02*
+G01*
-X41200000Y-67400000D01*
+X31000000Y-136000000D02*
-X67400000Y-41200000D02*
+X31000000Y-90000000D01*
-X58800000Y-32600000D01*
+X77000000Y-136000000D02*
-X83700000Y-24900000D02*
+X31000000Y-136000000D01*
-X67400000Y-41200000D01*
+X81000000Y-90000000D02*
-X75100000Y-16300000D02*
+X81000000Y-132000000D01*
-X83700000Y-24900000D01*
+X35000000Y-86000000D02*
-X58800000Y-32600000D02*
+X77000000Y-86000000D01*
-X75100000Y-16300000D01*
-X32600000Y-41200000D02*
-X16300000Y-25000000D01*
-X41200000Y-32600000D02*
-X32600000Y-41200000D01*
-X24900000Y-16300000D02*
-X41200000Y-32600000D01*
-X16300000Y-25000000D02*
-X24900000Y-16300000D01*
-X11000000Y-77000000D02*
-X11000000Y-23000000D01*
-X23000000Y-89000000D02*
-X11000000Y-77000000D01*
-X77000000Y-89000000D02*
-X23000000Y-89000000D01*
-X89000000Y-77000000D02*
-X77000000Y-89000000D01*
-X89000000Y-23000000D02*
-X89000000Y-77000000D01*
-X77000000Y-11000000D02*
-X89000000Y-23000000D01*
-X23000000Y-11000000D02*
-X77000000Y-11000000D01*
-X11000000Y-23000000D02*
-X23000000Y-11000000D01*
 M02*

pcb/ball-spider/spider-gerbers/ball-spider-NPTH.drl

@@ -1,23 +0,0 @@
-M48
-; DRILL file {KiCad 5.1.5} date Tue 28 Apr 2020 07:55:52 AM EDT
-; FORMAT={-:-/ absolute / inch / decimal}
-; #@! TF.CreationDate,2020-04-28T07:55:52-04:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,5.1.5
-; #@! TF.FileFunction,NonPlated,1,4,NPTH
-FMAT,2
-INCH
-T1C0.0787
-%
-G90
-G05
-T1
-X0.7478Y-0.7478
-X0.7478Y-3.1892
-X1.5189Y-1.5189
-X1.5189Y-2.4181
-X2.4181Y-1.5189
-X2.4181Y-2.4181
-X3.1892Y-0.7478
-X3.1892Y-3.1892
-T0
-M30

pcb/ball-spider/spider-gerbers/ball-spider-PTH.drl

@@ -1,241 +0,0 @@
-M48
-; DRILL file {KiCad 5.1.5} date Tue 28 Apr 2020 07:55:52 AM EDT
-; FORMAT={-:-/ absolute / inch / decimal}
-; #@! TF.CreationDate,2020-04-28T07:55:52-04:00
-; #@! TF.GenerationSoftware,Kicad,Pcbnew,5.1.5
-; #@! TF.FileFunction,Plated,1,4,PTH
-FMAT,2
-INCH
-T1C0.0079
-T2C0.0130
-T3C0.0394
-T4C0.1063
-%
-G90
-G05
-T1
-X1.7366Y-2.0004
-X1.7366Y-2.0469
-X1.7831Y-2.0004
-X1.7831Y-2.0469
-X2.272Y-2.0161
-X2.272Y-2.0626
-X2.3185Y-2.0161
-X2.3185Y-2.0626
-T2
-X1.0035Y-1.6425
-X1.0043Y-1.8457
-X1.0047Y-1.9189
-X1.0059Y-2.0248
-X1.0106Y-1.4795
-X1.0492Y-1.665
-X1.0525Y-1.7027
-X1.0685Y-1.952
-X1.1177Y-1.8752
-X1.1839Y-1.8197
-X1.2425Y-1.9398
-X1.2921Y-1.7543
-X1.2937Y-1.852
-X1.2965Y-2.0228
-X1.4173Y-1.9841
-X1.5157Y-1.0039
-X1.5543Y-0.652
-X1.5866Y-0.9138
-X1.5866Y-2.2244
-X1.5866Y-2.2559
-X1.5909Y-0.7571
-X1.6024Y-0.8661
-X1.6299Y-2.2244
-X1.6299Y-2.2559
-X1.6319Y-0.8386
-X1.6339Y-1.0354
-X1.6465Y-0.522
-X1.6577Y-1.5332
-X1.6731Y-1.9649
-X1.6732Y-2.2244
-X1.6732Y-2.2559
-X1.6772Y-1.0236
-X1.6791Y-0.5378
-X1.689Y-3.0906
-X1.7028Y-0.7571
-X1.7094Y-2.5579
-X1.7098Y-2.7035
-X1.7106Y-0.8059
-X1.7208Y-2.6538
-X1.7338Y-2.7621
-X1.7402Y-2.8189
-X1.7402Y-2.585
-X1.7413Y-0.5874
-X1.7472Y-0.689
-X1.751Y-0.6522
-X1.752Y-1.0315
-X1.7598Y-2.2244
-X1.7598Y-2.2559
-X1.7677Y-0.815
-X1.772Y-2.5532
-X1.7984Y-2.7745
-X1.8031Y-2.2244
-X1.8031Y-2.2559
-X1.8031Y-2.8937
-X1.8031Y-2.93
-X1.8091Y-2.1539
-X1.834Y-2.8465
-X1.8398Y-1.2421
-X1.8465Y-2.2244
-X1.8465Y-2.2559
-X1.8531Y-0.9417
-X1.8618Y-2.4677
-X1.8626Y-2.5476
-X1.8669Y-1.1114
-X1.8706Y-1.3611
-X1.874Y-1.5157
-X1.8761Y-1.1462
-X1.878Y-2.3661
-X1.8882Y-2.0551
-X1.8886Y-1.0173
-X1.8893Y-1.1765
-X1.8906Y-2.015
-X1.9016Y-0.7894
-X1.9055Y-2.3976
-X1.9181Y-1.5457
-X1.9219Y-2.6059
-X1.939Y-1.9417
-X1.9407Y-1.2283
-X1.9409Y-2.7283
-X1.9409Y-2.7913
-X1.9606Y-2.8945
-X1.9646Y-2.9902
-X1.9668Y-2.6273
-X1.9764Y-1.0433
-X1.9764Y-1.0787
-X1.9764Y-1.1142
-X1.9764Y-1.1496
-X1.9882Y-0.8563
-X1.9981Y-0.9453
-X2.0Y-2.7283
-X2.0Y-2.7913
-X2.0118Y-1.0433
-X2.0118Y-1.0787
-X2.0118Y-1.1142
-X2.0118Y-1.1496
-X2.0118Y-1.5906
-X2.0126Y-0.652
-X2.0236Y-2.185
-X2.0294Y-2.6166
-X2.0311Y-0.9448
-X2.0433Y-1.0433
-X2.0433Y-1.0787
-X2.0433Y-1.1142
-X2.0433Y-1.1496
-X2.0433Y-1.4764
-X2.0508Y-1.3334
-X2.0512Y-2.3177
-X2.0512Y-3.0571
-X2.0623Y-2.6139
-X2.0748Y-2.9134
-X2.0787Y-1.0433
-X2.0787Y-1.0787
-X2.0787Y-1.1142
-X2.0787Y-1.1496
-X2.0973Y-1.2635
-X2.1039Y-1.302
-X2.1077Y-2.6695
-X2.1143Y-1.488
-X2.1181Y-2.7008
-X2.1307Y-0.652
-X2.1427Y-2.7255
-X2.1441Y-0.8531
-X2.1575Y-1.1732
-X2.1575Y-2.5472
-X2.1606Y-2.0453
-X2.1681Y-1.9343
-X2.1913Y-2.25
-X2.1989Y-1.9102
-X2.1992Y-2.0154
-X2.2165Y-1.8031
-X2.2165Y-1.8346
-X2.2314Y-1.4265
-X2.2343Y-1.1598
-X2.237Y-2.1945
-X2.2598Y-1.8031
-X2.2598Y-1.8346
-X2.2756Y-1.1462
-X2.2811Y-2.1445
-X2.303Y-2.2687
-X2.3031Y-1.8031
-X2.3031Y-1.8346
-X2.3094Y-1.1331
-X2.3201Y-3.061
-X2.3622Y-2.0906
-X2.3898Y-1.8031
-X2.3898Y-1.8346
-X2.4079Y-1.9657
-X2.4291Y-3.3346
-X2.4331Y-1.8031
-X2.4331Y-1.8346
-X2.4764Y-1.8031
-X2.4764Y-1.8346
-T3
-X3.1071Y-1.6535
-X3.2071Y-1.6535
-X3.3071Y-1.6535
-X3.1071Y-1.4567
-X3.2071Y-1.4567
-X3.3071Y-1.4567
-X3.1071Y-2.2835
-X3.2071Y-2.2835
-X3.3071Y-2.2835
-X0.6299Y-2.4803
-X0.7299Y-2.4803
-X0.8299Y-2.4803
-X3.1071Y-2.4803
-X3.2071Y-2.4803
-X3.3071Y-2.4803
-X3.1071Y-1.8504
-X3.2071Y-1.8504
-X3.3071Y-1.8504
-X2.3512Y-0.9287
-X2.4219Y-0.858
-X2.4219Y-0.9995
-X2.4926Y-0.7873
-X2.4926Y-0.9287
-X2.5633Y-0.7166
-X2.5633Y-0.858
-X2.634Y-0.6459
-X2.634Y-0.7873
-X2.7047Y-0.7166
-X0.6299Y-2.2835
-X0.7299Y-2.2835
-X0.8299Y-2.2835
-X0.6299Y-1.4567
-X0.7299Y-1.4567
-X0.8299Y-1.4567
-X0.6299Y-1.6535
-X0.7299Y-1.6535
-X0.8299Y-1.6535
-X0.6299Y-1.8504
-X0.7299Y-1.8504
-X0.8299Y-1.8504
-X3.1071Y-2.0866
-X3.2071Y-2.0866
-X3.3071Y-2.0866
-X1.7087Y-3.2465
-X1.7087Y-3.3465
-X1.8087Y-3.2465
-X1.8087Y-3.3465
-X1.9087Y-3.2465
-X1.9087Y-3.3465
-X2.0087Y-3.2465
-X2.0087Y-3.3465
-X2.1087Y-3.2465
-X2.1087Y-3.3465
-X2.2087Y-3.2465
-X2.2087Y-3.3465
-X0.6299Y-2.0866
-X0.7299Y-2.0866
-X0.8299Y-2.0866
-T4
-X1.8661Y-1.752
-X2.063Y-1.752
-T0
-M30

pcb/ball-spider/spider-gerbers/ball-spider.drl

@@ -0,0 +1,165 @@
+M48
+; DRILL file {KiCad 5.1.6} date Sat Aug 22 22:17:53 2020
+; FORMAT={-:-/ absolute / inch / decimal}
+; #@! TF.CreationDate,2020-08-22T22:17:53-04:00
+; #@! TF.GenerationSoftware,Kicad,Pcbnew,5.1.6
+FMAT,2
+INCH
+T1C0.0118
+T2C0.0130
+T3C0.0394
+T4C0.1063
+T5C0.1260
+%
+G90
+G05
+T1
+X2.2878Y-5.1815
+X2.2878Y-5.228
+X2.3343Y-5.1815
+X2.3343Y-5.228
+X2.2996Y-4.7169
+X2.2996Y-4.7634
+X2.3461Y-4.7169
+X2.3461Y-4.7634
+T2
+X1.3458Y-4.0276
+X1.4035Y-3.8685
+X1.4358Y-4.1303
+X1.4402Y-3.9736
+X1.4516Y-4.0827
+X1.4811Y-4.0551
+X1.4831Y-4.252
+X1.5051Y-3.7123
+X1.5264Y-4.2394
+X1.5326Y-3.7579
+X1.5421Y-4.0
+X1.5537Y-3.9691
+X1.5894Y-3.8051
+X1.5972Y-3.9063
+X1.5996Y-3.8694
+X1.6504Y-3.8175
+X1.685Y-4.0709
+X1.6929Y-3.8661
+X1.7126Y-4.0197
+X1.7244Y-4.185
+X1.7311Y-3.8197
+X1.7541Y-4.0242
+X1.7665Y-3.8953
+X1.7672Y-4.0545
+X1.7792Y-4.1826
+X1.7795Y-3.6673
+X1.7913Y-4.3722
+X1.8187Y-4.1062
+X1.8386Y-4.2165
+X1.8543Y-3.9213
+X1.8543Y-3.9567
+X1.8543Y-3.9921
+X1.8543Y-4.0276
+X1.8661Y-3.7343
+X1.8761Y-3.8232
+X1.8898Y-3.9213
+X1.8898Y-3.9567
+X1.8898Y-3.9921
+X1.8898Y-4.0276
+X1.8906Y-3.5299
+X1.9091Y-3.8227
+X1.9213Y-3.9213
+X1.9213Y-3.9567
+X1.9213Y-3.9921
+X1.9213Y-4.0276
+X1.9252Y-4.6575
+X1.937Y-4.4488
+X1.9567Y-3.9213
+X1.9567Y-3.9567
+X1.9567Y-3.9921
+X1.9567Y-4.0276
+X1.9685Y-4.6535
+X1.9716Y-4.1331
+X1.9803Y-4.4449
+X1.9882Y-3.811
+X2.0079Y-4.6535
+X2.0087Y-3.5299
+X2.0197Y-4.4409
+X2.022Y-3.7311
+X2.0354Y-4.0512
+X2.0472Y-4.6535
+X2.0591Y-4.3268
+X2.0591Y-4.4409
+X2.0795Y-4.1332
+X2.1181Y-4.3189
+X2.1654Y-4.126
+X2.185Y-4.2456
+X2.2441Y-5.0984
+X2.252Y-4.6299
+X2.3175Y-4.1811
+X2.3739Y-4.0074
+X2.4094Y-4.1417
+X2.4291Y-4.2397
+X2.4291Y-5.0
+X2.4409Y-4.3228
+X2.4449Y-4.5354
+X2.4528Y-5.0827
+X2.4646Y-4.6181
+X2.5Y-5.0
+X2.5079Y-4.5354
+X2.5276Y-4.0
+X2.5276Y-5.259
+X2.5354Y-3.8976
+X2.5433Y-4.8071
+X2.5748Y-3.9173
+X2.6142Y-4.874
+X2.6378Y-4.4331
+X2.7756Y-3.9685
+X2.7835Y-3.7362
+X2.7874Y-4.0827
+X2.8307Y-4.6063
+X2.9606Y-4.4449
+X3.0Y-4.8622
+X3.0079Y-3.8976
+X3.0157Y-4.7992
+X3.1575Y-4.6063
+T3
+X1.315Y-4.8945
+X1.315Y-4.9945
+X1.315Y-5.0945
+X1.4646Y-4.8945
+X1.4646Y-4.9945
+X1.4646Y-5.0945
+X1.3189Y-4.5126
+X1.3189Y-4.6126
+X1.3189Y-4.7126
+X1.6181Y-4.5126
+X1.6181Y-4.6126
+X1.6181Y-4.7126
+X1.4685Y-4.5126
+X1.4685Y-4.6126
+X1.4685Y-4.7126
+X2.3252Y-3.4874
+X2.3252Y-3.5874
+X2.3252Y-3.6874
+X2.3252Y-3.7874
+X2.3252Y-3.8874
+X2.4252Y-3.4874
+X2.4252Y-3.5874
+X2.4252Y-3.6874
+X2.4252Y-3.7874
+X2.4252Y-3.8874
+X1.7638Y-4.8945
+X1.7638Y-4.9945
+X1.7638Y-5.0945
+X1.7677Y-4.5126
+X1.7677Y-4.6126
+X1.7677Y-4.7126
+X1.6126Y-4.8945
+X1.6126Y-4.9945
+X1.6126Y-5.0945
+T4
+X2.6441Y-4.2799
+X2.8409Y-4.2799
+T5
+X3.0315Y-5.1969
+X3.0315Y-3.5433
+X1.378Y-3.5433
+T0
+M30