controller-board/fw/ft232h.cfg

@@ -8,8 +8,6 @@ ftdi_layout_signal SWD_EN -data 0
 ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
 ftdi_layout_signal nSRST -data 0x0200 -oe 0x0200
 
-set WORKAREASIZE 0
-
 source [find target/stm32l0.cfg]
 
 $_TARGETNAME configure -event reset-end {

v5/pnp_model.py

@@ -1,25 +0,0 @@
-import cadquery as cq
-
-centers = [
-    (-5, 0),
-    (10, 5),
-    (10, -5)
-    ]
-
-plunger = (
-    cq.Workplane("XZ")
-    .polyline([
-        (0, 0),
-        (10, 0),
-        (9.2, 10),
-        (0, 10)
-        ])
-    .close()
-    .revolve()
-    .faces(">Z")
-    .workplane()
-    .pushPoints(centers)
-    .hole(3)
-    )
-
-show_object(plunger)