Regenerate Gerbers just to be safe

cnc-gerbers/cnc-controller-B_Cu.gbl

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L4,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-B_Fab.gbr

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Other,Fab,Bot*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*
@@ -15,74 +15,74 @@ G04 APERTURE LIST*
 %ADD12C,0.075000*%
 G04 APERTURE END LIST*
 D10*
-X86500000Y-122025000D02*
-X86500000Y-118825000D01*
-X86500000Y-118825000D02*
-X80200000Y-118825000D01*
-X80200000Y-118825000D02*
-X80200000Y-122025000D01*
 X80200000Y-122025000D02*
 X86500000Y-122025000D01*
-X96600000Y-119225000D02*
+X80200000Y-118825000D02*
-X96600000Y-122425000D01*
+X80200000Y-122025000D01*
-X96600000Y-122425000D02*
+X86500000Y-118825000D02*
-X102900000Y-122425000D01*
+X80200000Y-118825000D01*
-X102900000Y-122425000D02*
+X86500000Y-122025000D02*
-X102900000Y-119225000D01*
+X86500000Y-118825000D01*
 X102900000Y-119225000D02*
 X96600000Y-119225000D01*
-X56475000Y-122025000D02*
+X102900000Y-122425000D02*
-X56475000Y-118825000D01*
+X102900000Y-119225000D01*
-X56475000Y-118825000D02*
+X96600000Y-122425000D02*
-X50175000Y-118825000D01*
+X102900000Y-122425000D01*
-X50175000Y-118825000D02*
+X96600000Y-119225000D02*
-X50175000Y-122025000D01*
+X96600000Y-122425000D01*
 X50175000Y-122025000D02*
 X56475000Y-122025000D01*
-X66575000Y-119225000D02*
+X50175000Y-118825000D02*
-X66575000Y-122425000D01*
+X50175000Y-122025000D01*
-X66575000Y-122425000D02*
+X56475000Y-118825000D02*
-X72875000Y-122425000D01*
+X50175000Y-118825000D01*
-X72875000Y-122425000D02*
+X56475000Y-122025000D02*
-X72875000Y-119225000D01*
+X56475000Y-118825000D01*
 X72875000Y-119225000D02*
 X66575000Y-119225000D01*
-X26550000Y-122150000D02*
+X72875000Y-122425000D02*
-X26550000Y-118950000D01*
+X72875000Y-119225000D01*
-X26550000Y-118950000D02*
+X66575000Y-122425000D02*
-X20250000Y-118950000D01*
+X72875000Y-122425000D01*
-X20250000Y-118950000D02*
+X66575000Y-119225000D02*
-X20250000Y-122150000D01*
+X66575000Y-122425000D01*
 X20250000Y-122150000D02*
 X26550000Y-122150000D01*
-X36650000Y-119350000D02*
+X20250000Y-118950000D02*
-X36650000Y-122550000D01*
+X20250000Y-122150000D01*
-X36650000Y-122550000D02*
+X26550000Y-118950000D02*
-X42950000Y-122550000D01*
+X20250000Y-118950000D01*
-X42950000Y-122550000D02*
+X26550000Y-122150000D02*
-X42950000Y-119350000D01*
+X26550000Y-118950000D01*
 X42950000Y-119350000D02*
 X36650000Y-119350000D01*
-X53550000Y-52475000D02*
+X42950000Y-122550000D02*
-X54200000Y-53125000D01*
+X42950000Y-119350000D01*
-X55350000Y-53125000D02*
+X36650000Y-122550000D02*
-X54200000Y-53125000D01*
+X42950000Y-122550000D01*
-X53550000Y-52475000D02*
+X36650000Y-119350000D02*
-X53550000Y-50025000D01*
+X36650000Y-122550000D01*
-X55350000Y-50025000D02*
-X53550000Y-50025000D01*
 X55350000Y-53125000D02*
 X55350000Y-50025000D01*
-X45725000Y-52350000D02*
+X55350000Y-50025000D02*
-X46375000Y-53000000D01*
+X53550000Y-50025000D01*
-X47525000Y-53000000D02*
+X53550000Y-52475000D02*
-X46375000Y-53000000D01*
+X53550000Y-50025000D01*
-X45725000Y-52350000D02*
+X55350000Y-53125000D02*
-X45725000Y-49900000D01*
+X54200000Y-53125000D01*
-X47525000Y-49900000D02*
+X53550000Y-52475000D02*
-X45725000Y-49900000D01*
+X54200000Y-53125000D01*
 X47525000Y-53000000D02*
 X47525000Y-49900000D01*
+X47525000Y-49900000D02*
+X45725000Y-49900000D01*
+X45725000Y-52350000D02*
+X45725000Y-49900000D01*
+X47525000Y-53000000D02*
+X46375000Y-53000000D01*
+X45725000Y-52350000D02*
+X46375000Y-53000000D01*
 D11*
 X87135714Y-122497380D02*
 X86469047Y-122497380D01*

cnc-gerbers/cnc-controller-B_Mask.gbs

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Bot*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-B_Paste.gbp

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-B_SilkS.gbo

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Legend,Bot*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*
@@ -15,38 +15,38 @@ G04 APERTURE LIST*
 %ADD11C,0.150000*%
 G04 APERTURE END LIST*
 D10*
-X85527064Y-118325000D02*
-X81172936Y-118325000D01*
 X85527064Y-122525000D02*
 X81172936Y-122525000D01*
-X97572936Y-122925000D02*
+X85527064Y-118325000D02*
-X101927064Y-122925000D01*
+X81172936Y-118325000D01*
 X97572936Y-118725000D02*
 X101927064Y-118725000D01*
-X55502064Y-118325000D02*
+X97572936Y-122925000D02*
-X51147936Y-118325000D01*
+X101927064Y-122925000D01*
 X55502064Y-122525000D02*
 X51147936Y-122525000D01*
-X67547936Y-122925000D02*
+X55502064Y-118325000D02*
-X71902064Y-122925000D01*
+X51147936Y-118325000D01*
 X67547936Y-118725000D02*
 X71902064Y-118725000D01*
-X25577064Y-118450000D02*
+X67547936Y-122925000D02*
-X21222936Y-118450000D01*
+X71902064Y-122925000D01*
 X25577064Y-122650000D02*
 X21222936Y-122650000D01*
-X37622936Y-123050000D02*
+X25577064Y-118450000D02*
-X41977064Y-123050000D01*
+X21222936Y-118450000D01*
 X37622936Y-118850000D02*
 X41977064Y-118850000D01*
-X53550000Y-49965000D02*
+X37622936Y-123050000D02*
-X55350000Y-49965000D01*
+X41977064Y-123050000D01*
 X55350000Y-53185000D02*
 X52900000Y-53185000D01*
-X45725000Y-49840000D02*
+X53550000Y-49965000D02*
-X47525000Y-49840000D01*
+X55350000Y-49965000D01*
 X47525000Y-53060000D02*
 X45075000Y-53060000D01*
+X45725000Y-49840000D02*
+X47525000Y-49840000D01*
 D11*
 X82521428Y-123696428D02*
 X82721428Y-123410714D01*

cnc-gerbers/cnc-controller-Edge_Cuts.gm1

@@ -1,11 +1,11 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Profile,NP*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-F_Cu.gtl

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L1,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-F_Mask.gts

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Soldermask,Top*
 G04 #@! TF.FilePolarity,Negative*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-F_Paste.gtp

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Paste,Top*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-In1_Cu.g2

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L2,Inr*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller-In2_Cu.g3

@@ -1,12 +1,12 @@
 G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.10*
-G04 #@! TF.CreationDate,2021-06-05T17:26:15-04:00*
+G04 #@! TF.CreationDate,2021-06-06T22:50:30-04:00*
 G04 #@! TF.ProjectId,cnc-controller,636e632d-636f-46e7-9472-6f6c6c65722e,rev?*
 G04 #@! TF.SameCoordinates,Original*
 G04 #@! TF.FileFunction,Copper,L3,Inr*
 G04 #@! TF.FilePolarity,Positive*
 %FSLAX46Y46*%
 G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-05 17:26:15*
+G04 Created by KiCad (PCBNEW 5.1.10) date 2021-06-06 22:50:30*
 %MOMM*%
 %LPD*%
 G01*

cnc-gerbers/cnc-controller.drl

@@ -1,7 +1,7 @@
 M48
-; DRILL file {KiCad 5.1.10} date Sat Jun  5 17:26:17 2021
+; DRILL file {KiCad 5.1.10} date Sun Jun  6 22:50:35 2021
 ; FORMAT={-:-/ absolute / inch / decimal}
-; #@! TF.CreationDate,2021-06-05T17:26:17-04:00
+; #@! TF.CreationDate,2021-06-06T22:50:35-04:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,5.1.10
 FMAT,2
 INCH